From: Baolin Wang Date: Tue, 18 Aug 2020 03:41:58 +0000 (+0800) Subject: mfd: sprd: Add wakeup capability for PMIC IRQ X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=a75bfc824a2d33f57ebdc003bfe6b7a9e11e9cb9;p=linux.git mfd: sprd: Add wakeup capability for PMIC IRQ When changing to use suspend-to-idle to save power, the PMIC irq can not wakeup the system due to lack of wakeup capability, which will cause the sub-irqs (such as power key) of the PMIC can not wake up the system. Thus we can add the wakeup capability for PMIC irq to solve this issue, as well as removing the IRQF_NO_SUSPEND flag to allow PMIC irq to be a wakeup source. Reported-by: Chunyan Zhang Signed-off-by: Baolin Wang Tested-by: Chunyan Zhang Signed-off-by: Lee Jones --- diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c index f8a8b918c60d9..6b7956604a0f0 100644 --- a/drivers/mfd/sprd-sc27xx-spi.c +++ b/drivers/mfd/sprd-sc27xx-spi.c @@ -189,7 +189,7 @@ static int sprd_pmic_probe(struct spi_device *spi) ddata->irqs[i].mask = BIT(i); ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq, - IRQF_ONESHOT | IRQF_NO_SUSPEND, 0, + IRQF_ONESHOT, 0, &ddata->irq_chip, &ddata->irq_data); if (ret) { dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret); @@ -202,9 +202,34 @@ static int sprd_pmic_probe(struct spi_device *spi) return ret; } + device_init_wakeup(&spi->dev, true); return 0; } +#ifdef CONFIG_PM_SLEEP +static int sprd_pmic_suspend(struct device *dev) +{ + struct sprd_pmic *ddata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(ddata->irq); + + return 0; +} + +static int sprd_pmic_resume(struct device *dev) +{ + struct sprd_pmic *ddata = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(ddata->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, sprd_pmic_suspend, sprd_pmic_resume); + static const struct of_device_id sprd_pmic_match[] = { { .compatible = "sprd,sc2731", .data = &sc2731_data }, {}, @@ -215,6 +240,7 @@ static struct spi_driver sprd_pmic_driver = { .driver = { .name = "sc27xx-pmic", .of_match_table = sprd_pmic_match, + .pm = &sprd_pmic_pm_ops, }, .probe = sprd_pmic_probe, };