From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun, 8 May 2022 13:59:31 +0000 (+0200)
Subject: arm64: dts: qcom: correct interrupt controller on PM8916 and PMS405
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=a984d5d191527108a934cb9da2a15b07ea05a8ea;p=linux.git

arm64: dts: qcom: correct interrupt controller on PM8916 and PMS405

The PM8916 and PMS405 PMIC GPIOs are interrupt controllers, as described
in the bindings and used by the driver.  Drop the interrupts (apparently
copied from downstream tree), just like in commit 61d2ca503d0b ("arm64:
dts: qcom: fix pm8150 gpio interrupts"):

  qcs404-evb-4000.dtb: gpio@c000: 'interrupts' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
  qcs404-evb-4000.dtb: gpio@c000: 'interrupt-controller' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508135932.132378-4-krzysztof.kozlowski@linaro.org
---

diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index d52919a8c0b0b..0b6e8ad7fa503 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -113,10 +113,8 @@
 			gpio-controller;
 			gpio-ranges = <&pm8916_gpios 0 0 4>;
 			#gpio-cells = <2>;
-			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
-				     <0 0xc1 0 IRQ_TYPE_NONE>,
-				     <0 0xc2 0 IRQ_TYPE_NONE>,
-				     <0 0xc3 0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 26f1e8cc9c6cf..634b0681d04ca 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -43,18 +43,8 @@
 			gpio-controller;
 			gpio-ranges = <&pms405_gpios 0 0 12>;
 			#gpio-cells = <2>;
-			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
-				<0 0xc1 0 IRQ_TYPE_NONE>,
-				<0 0xc2 0 IRQ_TYPE_NONE>,
-				<0 0xc3 0 IRQ_TYPE_NONE>,
-				<0 0xc4 0 IRQ_TYPE_NONE>,
-				<0 0xc5 0 IRQ_TYPE_NONE>,
-				<0 0xc6 0 IRQ_TYPE_NONE>,
-				<0 0xc7 0 IRQ_TYPE_NONE>,
-				<0 0xc8 0 IRQ_TYPE_NONE>,
-				<0 0xc9 0 IRQ_TYPE_NONE>,
-				<0 0xca 0 IRQ_TYPE_NONE>,
-				<0 0xcb 0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pon@800 {