From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Fri, 7 Apr 2023 19:26:05 +0000 (+0200)
Subject: arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=a9e76cf1146b4911b14c102f5237e28abbbccfef;p=linux.git

arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node

The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared
by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not
in DSI0.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407192605.168666-1-krzysztof.kozlowski@linaro.org
---

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ef63aa86ad67c..37e72b1c56dce 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -328,6 +328,25 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs_plus>;
+		};
+
+		opp-262500000 {
+			opp-hz = /bits/ 64 <262500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -1591,25 +1610,6 @@
 
 				status = "disabled";
 
-				dsi_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					opp-131250000 {
-						opp-hz = /bits/ 64 <131250000>;
-						required-opps = <&rpmpd_opp_svs>;
-					};
-
-					opp-210000000 {
-						opp-hz = /bits/ 64 <210000000>;
-						required-opps = <&rpmpd_opp_svs_plus>;
-					};
-
-					opp-262500000 {
-						opp-hz = /bits/ 64 <262500000>;
-						required-opps = <&rpmpd_opp_nom>;
-					};
-				};
-
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;