From: Tomi Valkeinen Date: Wed, 25 Mar 2020 12:15:05 +0000 (+0100) Subject: media: ti-vpe: cal: program number of lines properly X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=aaf97874882ffefb5cf2a135085fc88169794e2d;p=linux.git media: ti-vpe: cal: program number of lines properly CAL_CSI2_CTX register has LINES field, which, according to the documentation, should be programmed to the number of lines transmitted by the camera. If the number of lines is unknown, it can be set to 0. The driver sets the field to 0 for some reason, even if we know the number of lines. This patch sets the number of lines properly, which will allow the HW to discard extra lines (if the sensor would send such for some reason), and, according to documentation: "This leads to regular video timings and avoids potential artifacts". Signed-off-by: Tomi Valkeinen Reviewed-by: Laurent Pinchart Reviewed-by: Benoit Parrot Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c index c7cbb50eb5f94..c124f28435d15 100644 --- a/drivers/media/platform/ti-vpe/cal.c +++ b/drivers/media/platform/ti-vpe/cal.c @@ -955,8 +955,7 @@ static void csi2_ctx_config(struct cal_ctx *ctx) set_field(&val, 0x1, CAL_CSI2_CTX_DT_MASK); /* Virtual Channel from the CSI2 sensor usually 0! */ set_field(&val, ctx->virtual_channel, CAL_CSI2_CTX_VC_MASK); - /* NUM_LINES_PER_FRAME => 0 means auto detect */ - set_field(&val, 0, CAL_CSI2_CTX_LINES_MASK); + set_field(&val, ctx->v_fmt.fmt.pix.height, CAL_CSI2_CTX_LINES_MASK); set_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK); set_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE, CAL_CSI2_CTX_PACK_MODE_MASK);