From: Stephen Boyd Date: Wed, 18 Nov 2015 19:33:17 +0000 (-0800) Subject: pinctrl: qcom: pmic-gpio/mpp: of_irq_count() == npins X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ab4256cfeab91569e1d96e7f0014538fe0845259;p=linux.git pinctrl: qcom: pmic-gpio/mpp: of_irq_count() == npins The number of interrupts is always equal to the number of pins provided by the PMIC gpio and MPP hardware blocks. Count the number of irqs to figure out the number of pins instead of adding more compatible strings or doing math on the reg property. This should make the code more generic and ease the number of changes we have to make to the driver for each new pmic revision. Cc: Ivan T. Ivanov Signed-off-by: Stephen Boyd Reviewed-by: Andy Gross Reviewed-by: Björn Andersson Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 6c42ca14d2fd3..543cdd6097888 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -693,16 +694,15 @@ static int pmic_gpio_probe(struct platform_device *pdev) struct pmic_gpio_pad *pad, *pads; struct pmic_gpio_state *state; int ret, npins, i; - u32 res[2]; + u32 reg; - ret = of_property_read_u32_array(dev->of_node, "reg", res, 2); + ret = of_property_read_u32(dev->of_node, "reg", ®); if (ret < 0) { - dev_err(dev, "missing base address and/or range"); + dev_err(dev, "missing base address"); return ret; } - npins = res[1] / PMIC_GPIO_ADDRESS_RANGE; - + npins = of_irq_count(dev->of_node); if (!npins) return -EINVAL; @@ -752,7 +752,7 @@ static int pmic_gpio_probe(struct platform_device *pdev) if (pad->irq < 0) return pad->irq; - pad->base = res[0] + i * PMIC_GPIO_ADDRESS_RANGE; + pad->base = reg + i * PMIC_GPIO_ADDRESS_RANGE; ret = pmic_gpio_populate(state, pad); if (ret < 0) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 9ce0e30e33e81..d778fb9c9dbf8 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -795,15 +796,15 @@ static int pmic_mpp_probe(struct platform_device *pdev) struct pmic_mpp_pad *pad, *pads; struct pmic_mpp_state *state; int ret, npins, i; - u32 res[2]; + u32 reg; - ret = of_property_read_u32_array(dev->of_node, "reg", res, 2); + ret = of_property_read_u32(dev->of_node, "reg", ®); if (ret < 0) { - dev_err(dev, "missing base address and/or range"); + dev_err(dev, "missing base address"); return ret; } - npins = res[1] / PMIC_MPP_ADDRESS_RANGE; + npins = of_irq_count(dev->of_node); if (!npins) return -EINVAL; @@ -854,7 +855,7 @@ static int pmic_mpp_probe(struct platform_device *pdev) if (pad->irq < 0) return pad->irq; - pad->base = res[0] + i * PMIC_MPP_ADDRESS_RANGE; + pad->base = reg + i * PMIC_MPP_ADDRESS_RANGE; ret = pmic_mpp_populate(state, pad); if (ret < 0) diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c index d809c9eaa3231..78fa2281116d6 100644 --- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -650,11 +651,12 @@ static int pm8xxx_pin_populate(struct pm8xxx_gpio *pctrl, } static const struct of_device_id pm8xxx_gpio_of_match[] = { - { .compatible = "qcom,pm8018-gpio", .data = (void *)6 }, - { .compatible = "qcom,pm8038-gpio", .data = (void *)12 }, - { .compatible = "qcom,pm8058-gpio", .data = (void *)40 }, - { .compatible = "qcom,pm8917-gpio", .data = (void *)38 }, - { .compatible = "qcom,pm8921-gpio", .data = (void *)44 }, + { .compatible = "qcom,pm8018-gpio" }, + { .compatible = "qcom,pm8038-gpio" }, + { .compatible = "qcom,pm8058-gpio" }, + { .compatible = "qcom,pm8917-gpio" }, + { .compatible = "qcom,pm8921-gpio" }, + { .compatible = "qcom,ssbi-gpio" }, { }, }; MODULE_DEVICE_TABLE(of, pm8xxx_gpio_of_match); @@ -672,7 +674,9 @@ static int pm8xxx_gpio_probe(struct platform_device *pdev) return -ENOMEM; pctrl->dev = &pdev->dev; - pctrl->npins = (unsigned)of_device_get_match_data(&pdev->dev); + pctrl->npins = of_irq_count(pdev->dev.of_node); + if (!pctrl->npins) + return -EINVAL; pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); if (!pctrl->regmap) { diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c index 8982027de8e8b..0831063da54cc 100644 --- a/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -741,11 +742,12 @@ static int pm8xxx_pin_populate(struct pm8xxx_mpp *pctrl, } static const struct of_device_id pm8xxx_mpp_of_match[] = { - { .compatible = "qcom,pm8018-mpp", .data = (void *)6 }, - { .compatible = "qcom,pm8038-mpp", .data = (void *)6 }, - { .compatible = "qcom,pm8917-mpp", .data = (void *)10 }, - { .compatible = "qcom,pm8821-mpp", .data = (void *)4 }, - { .compatible = "qcom,pm8921-mpp", .data = (void *)12 }, + { .compatible = "qcom,pm8018-mpp" }, + { .compatible = "qcom,pm8038-mpp" }, + { .compatible = "qcom,pm8917-mpp" }, + { .compatible = "qcom,pm8821-mpp" }, + { .compatible = "qcom,pm8921-mpp" }, + { .compatible = "qcom,ssbi-mpp" }, { }, }; MODULE_DEVICE_TABLE(of, pm8xxx_mpp_of_match); @@ -763,7 +765,9 @@ static int pm8xxx_mpp_probe(struct platform_device *pdev) return -ENOMEM; pctrl->dev = &pdev->dev; - pctrl->npins = (unsigned)of_device_get_match_data(&pdev->dev); + pctrl->npins = of_irq_count(pdev->dev.of_node); + if (!pctrl->npins) + return -EINVAL; pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); if (!pctrl->regmap) {