From: Jiawen Wu <jiawenwu@trustnetic.com>
Date: Wed, 23 Aug 2023 06:19:35 +0000 (+0800)
Subject: net: ngbe: move mdio access registers to libwx
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ad63f7aa585ee58ebf5e83af09653134a21cd082;p=linux.git
net: ngbe: move mdio access registers to libwx
Registers of mdio accessing are common defined in libwx, remove the
redundant macro definitions in ngbe driver.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
index fe20f02ecb3aa..591f5b7b6da65 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c
@@ -37,24 +37,24 @@ static int ngbe_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regn
wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
/* setup and write the address cycle command */
- command = NGBE_MSCA_RA(regnum) |
- NGBE_MSCA_PA(phy_addr) |
- NGBE_MSCA_DA(device_type);
- wr32(wx, NGBE_MSCA, command);
- command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
- NGBE_MSCC_BUSY |
- NGBE_MDIO_CLK(6);
- wr32(wx, NGBE_MSCC, command);
+ command = WX_MSCA_RA(regnum) |
+ WX_MSCA_PA(phy_addr) |
+ WX_MSCA_DA(device_type);
+ wr32(wx, WX_MSCA, command);
+ command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
+ WX_MSCC_BUSY |
+ WX_MDIO_CLK(6);
+ wr32(wx, WX_MSCC, command);
/* wait to complete */
- ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
- 100000, false, wx, NGBE_MSCC);
+ ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+ 100000, false, wx, WX_MSCC);
if (ret) {
wx_err(wx, "Mdio read c22 command did not complete.\n");
return ret;
}
- return (u16)rd32(wx, NGBE_MSCC);
+ return (u16)rd32(wx, WX_MSCC);
}
static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
@@ -65,19 +65,19 @@ static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int reg
wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
/* setup and write the address cycle command */
- command = NGBE_MSCA_RA(regnum) |
- NGBE_MSCA_PA(phy_addr) |
- NGBE_MSCA_DA(device_type);
- wr32(wx, NGBE_MSCA, command);
+ command = WX_MSCA_RA(regnum) |
+ WX_MSCA_PA(phy_addr) |
+ WX_MSCA_DA(device_type);
+ wr32(wx, WX_MSCA, command);
command = value |
- NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
- NGBE_MSCC_BUSY |
- NGBE_MDIO_CLK(6);
- wr32(wx, NGBE_MSCC, command);
+ WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
+ WX_MSCC_BUSY |
+ WX_MDIO_CLK(6);
+ wr32(wx, WX_MSCC, command);
/* wait to complete */
- ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
- 100000, false, wx, NGBE_MSCC);
+ ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+ 100000, false, wx, WX_MSCC);
if (ret)
wx_err(wx, "Mdio write c22 command did not complete.\n");
@@ -92,24 +92,24 @@ static int ngbe_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devn
wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
/* setup and write the address cycle command */
- command = NGBE_MSCA_RA(regnum) |
- NGBE_MSCA_PA(phy_addr) |
- NGBE_MSCA_DA(devnum);
- wr32(wx, NGBE_MSCA, command);
- command = NGBE_MSCC_CMD(NGBE_MSCA_CMD_READ) |
- NGBE_MSCC_BUSY |
- NGBE_MDIO_CLK(6);
- wr32(wx, NGBE_MSCC, command);
+ command = WX_MSCA_RA(regnum) |
+ WX_MSCA_PA(phy_addr) |
+ WX_MSCA_DA(devnum);
+ wr32(wx, WX_MSCA, command);
+ command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
+ WX_MSCC_BUSY |
+ WX_MDIO_CLK(6);
+ wr32(wx, WX_MSCC, command);
/* wait to complete */
- ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
- 100000, false, wx, NGBE_MSCC);
+ ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+ 100000, false, wx, WX_MSCC);
if (ret) {
wx_err(wx, "Mdio read c45 command did not complete.\n");
return ret;
}
- return (u16)rd32(wx, NGBE_MSCC);
+ return (u16)rd32(wx, WX_MSCC);
}
static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
@@ -121,19 +121,19 @@ static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
/* setup and write the address cycle command */
- command = NGBE_MSCA_RA(regnum) |
- NGBE_MSCA_PA(phy_addr) |
- NGBE_MSCA_DA(devnum);
- wr32(wx, NGBE_MSCA, command);
+ command = WX_MSCA_RA(regnum) |
+ WX_MSCA_PA(phy_addr) |
+ WX_MSCA_DA(devnum);
+ wr32(wx, WX_MSCA, command);
command = value |
- NGBE_MSCC_CMD(NGBE_MSCA_CMD_WRITE) |
- NGBE_MSCC_BUSY |
- NGBE_MDIO_CLK(6);
- wr32(wx, NGBE_MSCC, command);
+ WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
+ WX_MSCC_BUSY |
+ WX_MDIO_CLK(6);
+ wr32(wx, WX_MSCC, command);
/* wait to complete */
- ret = read_poll_timeout(rd32, val, !(val & NGBE_MSCC_BUSY), 1000,
- 100000, false, wx, NGBE_MSCC);
+ ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
+ 100000, false, wx, WX_MSCC);
if (ret)
wx_err(wx, "Mdio write c45 command did not complete.\n");
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
index b70eca397b672..72c8cd2d55751 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
@@ -59,25 +59,6 @@
#define NGBE_EEPROM_VERSION_L 0x1D
#define NGBE_EEPROM_VERSION_H 0x1E
-/* mdio access */
-#define NGBE_MSCA 0x11200
-#define NGBE_MSCA_RA(v) FIELD_PREP(U16_MAX, v)
-#define NGBE_MSCA_PA(v) FIELD_PREP(GENMASK(20, 16), v)
-#define NGBE_MSCA_DA(v) FIELD_PREP(GENMASK(25, 21), v)
-#define NGBE_MSCC 0x11204
-#define NGBE_MSCC_CMD(v) FIELD_PREP(GENMASK(17, 16), v)
-
-enum NGBE_MSCA_CMD_value {
- NGBE_MSCA_CMD_RSV = 0,
- NGBE_MSCA_CMD_WRITE,
- NGBE_MSCA_CMD_POST_READ,
- NGBE_MSCA_CMD_READ,
-};
-
-#define NGBE_MSCC_SADDR BIT(18)
-#define NGBE_MSCC_BUSY BIT(22)
-#define NGBE_MDIO_CLK(v) FIELD_PREP(GENMASK(21, 19), v)
-
/* Media-dependent registers. */
#define NGBE_MDIO_CLAUSE_SELECT 0x11220