From: Linus Walleij <linus.walleij@linaro.org>
Date: Mon, 15 Jul 2019 08:05:02 +0000 (+0200)
Subject: ARM: dts: ux500: Fix up the thermal nodes
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=aef41a4d88ef11a04b29d9f2ffdfd46eb317d7d8;p=linux.git
ARM: dts: ux500: Fix up the thermal nodes
The thermal driver for the DB8500 was never properly converted
to device tree, the node should definitely be activated for
all board variants so move this down into the main SoC
DTSI, and default on.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 339da70d4e834..90dcbc3a29c35 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -505,10 +505,30 @@
thermal@801573c0 {
compatible = "stericsson,db8500-thermal";
reg = <0x801573c0 0x40>;
+ interrupt-parent = <&prcmu>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
<22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
- status = "disabled";
+ num-trips = <4>;
+
+ trip0-temp = <70000>;
+ trip0-type = "active";
+ trip0-cdev-num = <1>;
+ trip0-cdev-name0 = "thermal-cpufreq-0";
+
+ trip1-temp = <75000>;
+ trip1-type = "active";
+ trip1-cdev-num = <1>;
+ trip1-cdev-name0 = "thermal-cpufreq-0";
+
+ trip2-temp = <80000>;
+ trip2-type = "active";
+ trip2-cdev-num = <1>;
+ trip2-cdev-name0 = "thermal-cpufreq-0";
+
+ trip3-temp = <85000>;
+ trip3-type = "critical";
+ trip3-cdev-num = <0>;
};
db8500-prcmu-regulators {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 3428290644baa..064e8abec9546 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,40 +376,11 @@
pinctrl-0 = <&ssp0_snowball_mode>;
};
- cpufreq-cooling {
- status = "okay";
- };
-
prcmu@80157000 {
cpufreq {
status = "okay";
};
- thermal@801573c0 {
- num-trips = <4>;
-
- trip0-temp = <70000>;
- trip0-type = "active";
- trip0-cdev-num = <1>;
- trip0-cdev-name0 = "thermal-cpufreq-0";
-
- trip1-temp = <75000>;
- trip1-type = "active";
- trip1-cdev-num = <1>;
- trip1-cdev-name0 = "thermal-cpufreq-0";
-
- trip2-temp = <80000>;
- trip2-type = "active";
- trip2-cdev-num = <1>;
- trip2-cdev-name0 = "thermal-cpufreq-0";
-
- trip3-temp = <85000>;
- trip3-type = "critical";
- trip3-cdev-num = <0>;
-
- status = "okay";
- };
-
ab8500 {
ab8500-gpio {
/*