From: Dragos Bogdan Date: Wed, 11 Mar 2020 08:43:25 +0000 (+0200) Subject: iio: adc: ad7476: Generate CONVST signal internally X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=af37e4703d00cea66e467ffe69afe2540fa32f75;p=linux.git iio: adc: ad7476: Generate CONVST signal internally Compared to the other supported parts, AD7091R are dependent of a CONVST signal that initiates the conversion. At this moment, only sampling in buffered mode is supported for AD7091R and the only option until now was to generate this signal externally using an IIO trigger. This patch adds the option of generating it internally, more compatible triggers being available in this case. Also, it is an intermediate step of adding support more devices. Signed-off-by: Dragos Bogdan Signed-off-by: Beniamin Bia Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c index 76747488044b8..32e857dfec9cd 100644 --- a/drivers/iio/adc/ad7476.c +++ b/drivers/iio/adc/ad7476.c @@ -12,9 +12,11 @@ #include #include #include +#include #include #include #include +#include #include #include @@ -34,6 +36,7 @@ struct ad7476_state { struct spi_device *spi; const struct ad7476_chip_info *chip_info; struct regulator *reg; + struct gpio_desc *convst_gpio; struct spi_transfer xfer; struct spi_message msg; /* @@ -64,6 +67,17 @@ enum ad7476_supported_device_ids { ID_ADS7868, }; +static void ad7091_convst(struct ad7476_state *st) +{ + if (!st->convst_gpio) + return; + + gpiod_set_value(st->convst_gpio, 0); + udelay(1); /* CONVST pulse width: 10 ns min */ + gpiod_set_value(st->convst_gpio, 1); + udelay(1); /* Conversion time: 650 ns max */ +} + static irqreturn_t ad7476_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -71,6 +85,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void *p) struct ad7476_state *st = iio_priv(indio_dev); int b_sent; + ad7091_convst(st); + b_sent = spi_sync(st->spi, &st->msg); if (b_sent < 0) goto done; @@ -254,6 +270,12 @@ static int ad7476_probe(struct spi_device *spi) if (ret) return ret; + st->convst_gpio = devm_gpiod_get_optional(&spi->dev, + "adi,conversion-start", + GPIOD_OUT_LOW); + if (IS_ERR(st->convst_gpio)) + return PTR_ERR(st->convst_gpio); + spi_set_drvdata(spi, indio_dev); st->spi = spi;