From: Nícolas F. R. A. Prado Date: Wed, 25 May 2022 15:57:13 +0000 (-0400) Subject: dt-bindings: pinctrl: mt8192: Add drive-strength-microamp X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=b52e695324bb;p=linux.git dt-bindings: pinctrl: mt8192: Add drive-strength-microamp Commit e5fabbe43f3f ("pinctrl: mediatek: paris: Support generic PIN_CONFIG_DRIVE_STRENGTH_UA") added support for using drive-strength-microamp instead of mediatek,drive-strength-adv. Since there aren't any users of mediatek,drive-strength-adv on mt8192 yet, remove this property and add drive-strength-microamp in its place, which has a clearer meaning. Fixes: 4ac68333ff6d ("dt-bindings: pinctrl: mt8192: Add mediatek,drive-strength-adv property") Signed-off-by: Nícolas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20220525155714.1837360-2-nfraprado@collabora.com Signed-off-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml index c90a132fbc790..8ede8b7502373 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml @@ -80,31 +80,8 @@ patternProperties: dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. enum: [2, 4, 6, 8, 10, 12, 14, 16] - mediatek,drive-strength-adv: - description: | - Describe the specific driving setup property. - For I2C pins, the existing generic driving setup can only support - 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they - can support 0.125/0.25/0.5/1mA adjustment. If we enable specific - driving setup, the existing generic setup will be disabled. - The specific driving setup is controlled by E1E0EN. - When E1=0/E0=0, the strength is 0.125mA. - When E1=0/E0=1, the strength is 0.25mA. - When E1=1/E0=0, the strength is 0.5mA. - When E1=1/E0=1, the strength is 1mA. - EN is used to enable or disable the specific driving setup. - Valid arguments are described as below: - 0: (E1, E0, EN) = (0, 0, 0) - 1: (E1, E0, EN) = (0, 0, 1) - 2: (E1, E0, EN) = (0, 1, 0) - 3: (E1, E0, EN) = (0, 1, 1) - 4: (E1, E0, EN) = (1, 0, 0) - 5: (E1, E0, EN) = (1, 0, 1) - 6: (E1, E0, EN) = (1, 1, 0) - 7: (E1, E0, EN) = (1, 1, 1) - So the valid arguments are from 0 to 7. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3, 4, 5, 6, 7] + drive-strength-microamp: + enum: [125, 250, 500, 1000] mediatek,pull-up-adv: description: |