From: Douglas Anderson Date: Mon, 29 Aug 2022 16:49:51 +0000 (-0700) Subject: arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=b7870d460c05ce31e2311036d91de1e2e0b32cea;p=linux.git arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed This board uses RPMH, specifies "regulator-allow-set-load" for LDOs, but doesn't specify any modes with "regulator-allowed-modes". Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement get_optimum_mode(), not set_load()") the above meant that we were able to set either LPM or HPM mode. After that commit (and fixes [1]) we'll be stuck at the initial mode. Discussion of this has resulted in the decision that the old dts files were wrong and should be fixed to fully restore old functionality. Let's re-enable the old functionality by fixing the dts. [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid Fixes: 69cdb97ef652 ("arm64: dts: qcom: sm8250: Add support for SONY Xperia 1 II / 5 II (Edo platform)") Signed-off-by: Douglas Anderson Reviewed-by: Andrew Halaney Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220829094903.v2.5.Ie446d5183d8b1e9ec4e32228ca300e604e3315eb@changeid --- diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index 549e0a2aa9fe4..5428aab3058dd 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -317,6 +317,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = ; regulator-allow-set-load; + regulator-allowed-modes = + ; }; vreg_l7c_2p85: ldo7 { @@ -339,6 +342,9 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = ; regulator-allow-set-load; + regulator-allowed-modes = + ; }; vreg_l10c_3p3: ldo10 {