From: Jonathan McDowell Date: Sat, 4 Jul 2020 17:23:34 +0000 (+0100) Subject: firmware: qcom_scm: Fix legacy convention SCM accessors X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=b88c28280c3f7097546db93824686db1e7dceee1;p=linux.git firmware: qcom_scm: Fix legacy convention SCM accessors The move to a combined driver for the QCOM SCM hardware changed the io_writel and io_readl helpers to use non-atomic calls, despite the commit message saying that atomic was a better option. This breaks these helpers on hardware that uses the old legacy convention (access fails with a -95 return code). Switch back to using the atomic calls. Observed as a failure routing GPIO interrupts to the Apps processor on an IPQ8064; fix is confirmed as correctly allowing the interrupts to be routed and observed. Reviewed-by: Elliot Berman Fixes: 57d3b816718c ("firmware: qcom_scm: Remove thin wrappers") Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell Link: https://lore.kernel.org/r/20200704172334.GA759@earth.li Signed-off-by: Bjorn Andersson --- diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index 0e7233a20f34b..d4fda210adfef 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -391,7 +391,7 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable) desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0; - return qcom_scm_call(__scm->dev, &desc, NULL); + return qcom_scm_call_atomic(__scm->dev, &desc, NULL); } static void qcom_scm_set_download_mode(bool enable) @@ -650,7 +650,7 @@ int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) int ret; - ret = qcom_scm_call(__scm->dev, &desc, &res); + ret = qcom_scm_call_atomic(__scm->dev, &desc, &res); if (ret >= 0) *val = res.result[0]; @@ -669,8 +669,7 @@ int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) .owner = ARM_SMCCC_OWNER_SIP, }; - - return qcom_scm_call(__scm->dev, &desc, NULL); + return qcom_scm_call_atomic(__scm->dev, &desc, NULL); } EXPORT_SYMBOL(qcom_scm_io_writel);