From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Thu, 8 Sep 2022 08:10:48 +0000 (+0200)
Subject: arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=b94d7c1fc7c6ac4e2ce83e9fc6a84fc3034b631c;p=linux.git

arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema

Bindings expect PMIC GPIO pin configuration nodes to be named with
'-state' suffix:

  qcom/msm8996-xiaomi-scorpio.dtb: pmic@0: gpio@c000: 'irled-default', 'keypad-default' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

Drop also additional indentation via "pinconf" to make the code a bit
smaller.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908081050.29751-3-krzysztof.kozlowski@linaro.org
---

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index ef9a8aa9c2b9f..77819186086ac 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -651,15 +651,13 @@
 };
 
 &pm8994_gpios {
-	irled_default: irled-default {
-		pinconf {
-			pins = "gpio5";
-			function = PMIC_GPIO_FUNC_FUNC1;
-			output-low;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-			power-source = <PM8994_GPIO_S4>;
-			bias-disable;
-		};
+	irled_default: irled-default-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
 	};
 
 	wlan_en_default: wlan-en-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
index bc8ebf10be9c0..79be5fb1295b0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
@@ -279,15 +279,13 @@
 		"UIM_BATT_ALARM",	/* GPIO_21 */
 		"NC";			/* GPIO_22 */
 
-	keypad_default: keypad-default {
-		pinconf {
-			pins = "gpio7", "gpio10";
-			function = PMIC_GPIO_FUNC_FUNC1;
-			output-low;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			power-source = <PM8994_GPIO_S4>;
-			bias-disable;
-		};
+	keypad_default: keypad-default-state {
+		pins = "gpio7", "gpio10";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
 	};
 };