From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 6 Jun 2023 10:01:40 +0000 (+0200)
Subject: dt-bindings: gpio: gpio-delay: Spelling s/curcuit/circuit/
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ba65c79fbb813423e7d42d99375e2045b27958a6;p=linux.git

dt-bindings: gpio: gpio-delay: Spelling s/curcuit/circuit/

Fix misspellings of "circuit".

Fixes: c7239a3da1628767 ("dt-bindings: gpio: Add gpio-delay binding document")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---

diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
index 7c16a4e1a768e..1cebc4058e272 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This binding describes an electrical setup where setting an GPIO output
-  is delayed by some external setup, e.g. RC curcuit.
+  is delayed by some external setup, e.g. RC circuit.
 
   +----------+                    +-----------+
   |          |             VCC_B  |           |
@@ -30,7 +30,7 @@ description: |
                            GND
 
   If the input on the consumer is controlled by an open-drain signal
-  attached to an RC curcuit the ramp-up delay is not under control
+  attached to an RC circuit the ramp-up delay is not under control
   of the GPIO controller.
 
 properties: