From: Arınç ÜNAL Date: Sat, 11 Feb 2023 10:49:15 +0000 (+0300) Subject: mips: dts: ralink: mt7621: add port@5 as CPU port X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=bae833414bfe6a33f6d55d5e0eb38e5989c6fe7b;p=linux.git mips: dts: ralink: mt7621: add port@5 as CPU port On MT7621AT, MT7621DAT, and MT7621ST SoCs, port 5 of the MT7530 switch is connected to the second MAC of the SoC as a CPU port. Add the port and set up the second MAC on the bindings. Revert PHY muxing on GB-PC1. There's an external PHY connected to the second MAC of the SoC on GB-PC2, therefore, disable port@5 for this device. Signed-off-by: Arınç ÜNAL Acked-by: Sergio Paracuellos Signed-off-by: Thomas Bogendoerfer --- diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts index 4314aee97e187..129b6710b699d 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts @@ -91,22 +91,16 @@ status = "okay"; }; -&gmac1 { - status = "okay"; - phy-handle = <ðphy4>; -}; - -&mdio { - ethphy4: ethernet-phy@4 { - reg = <4>; - }; -}; - &switch0 { ports { port@0 { status = "okay"; label = "ethblack"; }; + + port@4 { + status = "okay"; + label = "ethblue"; + }; }; }; diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts index 3ebbf933f644b..f810cd10f4f4f 100644 --- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts +++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts @@ -112,9 +112,12 @@ }; &gmac1 { - status = "okay"; phy-mode = "rgmii-rxid"; phy-handle = <ðphy5>; + + fixed-link { + status = "disabled"; + }; }; &mdio { @@ -134,5 +137,9 @@ status = "okay"; label = "ethblue"; }; + + port@5 { + status = "disabled"; + }; }; }; diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi index aec85c7793597..290d47fbcfbb7 100644 --- a/arch/mips/boot/dts/ralink/mt7621.dtsi +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi @@ -332,8 +332,13 @@ gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; - status = "disabled"; phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; }; mdio: mdio-bus { @@ -384,6 +389,18 @@ label = "swp4"; }; + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + port@6 { reg = <6>; ethernet = <&gmac0>;