From: Florian Fainelli Date: Tue, 10 Dec 2019 18:53:47 +0000 (-0800) Subject: ata: ahci_brcm: Add missing clock management during recovery X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=bf0e5013bc2dcac205417e1252205dca39dfc005;p=linux.git ata: ahci_brcm: Add missing clock management during recovery The downstream implementation of ahci_brcm.c did contain clock management recovery, but until recently, did that outside of the libahci_platform helpers and this was unintentionally stripped out while forward porting the patch upstream. Add the missing clock management during recovery and sleep for 10 milliseconds per the design team recommendations to ensure the SATA PHY controller and AFE have been fully quiesced. Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices") Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede Signed-off-by: Florian Fainelli Signed-off-by: Jens Axboe --- diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c index 58f8fd7bb8b8b..66a570d0da837 100644 --- a/drivers/ata/ahci_brcm.c +++ b/drivers/ata/ahci_brcm.c @@ -274,6 +274,13 @@ static unsigned int brcm_ahci_read_id(struct ata_device *dev, /* Perform the SATA PHY reset sequence */ brcm_sata_phy_disable(priv, ap->port_no); + /* Reset the SATA clock */ + ahci_platform_disable_clks(hpriv); + msleep(10); + + ahci_platform_enable_clks(hpriv); + msleep(10); + /* Bring the PHY back on */ brcm_sata_phy_enable(priv, ap->port_no);