From: Niyas Sait Date: Thu, 17 Nov 2022 12:35:42 +0000 (+0000) Subject: pinconf-generic: fix style issues in pin_config_param doc X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c21dd79e9909c9cf90f8b1ca8ad2753cedb6c655;p=linux.git pinconf-generic: fix style issues in pin_config_param doc Fixes following issues introduced in a previous commit to clarify values for pin config pull up and down types. - replace spaces with tabs to be consistent with rest of the doc - use capitalization for unit (ohms -> Ohms) Signed-off-by: Niyas Sait Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20221117123542.1154252-1-niyas.sait@linaro.org Signed-off-by: Linus Walleij --- diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index c9c10142657e8..d74b7a4ea154d 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -39,7 +39,7 @@ struct pinctrl_map; * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high * impedance to GROUND). If the argument is != 0 pull-down is enabled, * the value is interpreted by the driver and can be custom or an SI unit - * such as ohms. + * such as Ohms. * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based * on embedded knowledge of the controller hardware, like current mux * function. The pull direction and possibly strength too will normally @@ -51,7 +51,7 @@ struct pinctrl_map; * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high * impedance to VDD). If the argument is != 0 pull-up is enabled, * the value is interpreted by the driver and can be custom or an SI unit - * such as ohms. + * such as Ohms. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports * which are then pulled up with an external resistor. Setting this