From: Michal Vokáč Date: Fri, 26 Jan 2024 10:49:35 +0000 (+0100) Subject: net: dsa: qca8k: fix illegal usage of GPIO X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c44fc98f0a8ffd94fa0bd291928e7e312ffc7ca4;p=linux.git net: dsa: qca8k: fix illegal usage of GPIO When working with GPIO, its direction must be set either when the GPIO is requested by gpiod_get*() or later on by one of the gpiod_direction_*() functions. Neither of this is done here which results in undefined behavior on some systems. As the reset GPIO is used right after it is requested here, it makes sense to configure it as GPIOD_OUT_HIGH right away. With that, the following gpiod_set_value_cansleep(1) becomes redundant and can be safely removed. Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature") Signed-off-by: Michal Vokáč Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c index c51f40960961f..7a864329cb726 100644 --- a/drivers/net/dsa/qca/qca8k-8xxx.c +++ b/drivers/net/dsa/qca/qca8k-8xxx.c @@ -2051,12 +2051,11 @@ qca8k_sw_probe(struct mdio_device *mdiodev) priv->info = of_device_get_match_data(priv->dev); priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset", - GPIOD_ASIS); + GPIOD_OUT_HIGH); if (IS_ERR(priv->reset_gpio)) return PTR_ERR(priv->reset_gpio); if (priv->reset_gpio) { - gpiod_set_value_cansleep(priv->reset_gpio, 1); /* The active low duration must be greater than 10 ms * and checkpatch.pl wants 20 ms. */