From: Vignesh R <vigneshr@ti.com>
Date: Wed, 12 Dec 2018 05:18:06 +0000 (+0530)
Subject: arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c484fc957219e95e023efe74bfc6cc189303e6f4;p=linux.git

arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes

Populate power-domain property for UART nodes, this is required for
Linux to enable UART clocks via PM calls. Without this UART instances
not initialized by bootloader (like main_uart1) fails to work in Linux.
Also, drop current-speed property from main_uart1 and main_uart2 nodes
as these UARTs are not initialized before Linux boots up and current
speed is unknown.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 0a0a8fc5df646..6446652850c6e 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -48,6 +48,7 @@
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
+		power-domains = <&k3_pds 146>;
 	};
 
 	main_uart1: serial@2810000 {
@@ -57,7 +58,7 @@
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
+		power-domains = <&k3_pds 147>;
 	};
 
 	main_uart2: serial@2820000 {
@@ -67,7 +68,7 @@
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
-		current-speed = <115200>;
+		power-domains = <&k3_pds 148>;
 	};
 
 	main_pmx0: pinmux@11c000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 1fd027748e1fa..3b7a519960b90 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -14,6 +14,7 @@
 			interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <96000000>;
 			current-speed = <115200>;
+			power-domains = <&k3_pds 149>;
 	};
 
 	mcu_i2c0: i2c@40b00000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 9e8467ce7ad8e..7cbdc0912ab70 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -50,6 +50,7 @@
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <48000000>;
 		current-speed = <115200>;
+		power-domains = <&k3_pds 150>;
 	};
 
 	wkup_i2c0: i2c@42120000 {