From: Stephan Gerhold <stephan@gerhold.net>
Date: Fri, 14 May 2021 10:43:28 +0000 (+0200)
Subject: arm64: dts: qcom: msm8916-huawei-g7: Add NFC
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c4e61e0af4d9f72f77462b9d6759496c6e9f4c29;p=linux.git

arm64: dts: qcom: msm8916-huawei-g7: Add NFC

The Huawei Ascend G7 supports NFC using the NXP PN547, which is
supported by the nxp-nci-i2c driver in mainline. It seems to detect
NFC tags using "nfctool" just fine, although it seems like there
are not really any useful applications making use of the Linux NFC
subsystem. :(

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210514104328.18756-5-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 5ad4e921b1108..e0075b5741908 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -193,6 +193,24 @@
 	};
 };
 
+&blsp_i2c6 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_default>;
+	};
+};
+
 &blsp1_uart2 {
 	status = "okay";
 };
@@ -378,6 +396,14 @@
 		bias-disable;
 	};
 
+	nfc_default: nfc-default {
+		pins = "gpio2", "gpio20", "gpio21";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	mag_reset_default: mag-reset-default {
 		pins = "gpio36";
 		function = "gpio";