From: Heiner Kallweit Date: Tue, 21 Jan 2020 21:05:14 +0000 (+0100) Subject: net: convert additional drivers to use phy_do_ioctl X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c5d19a6ecfce72d0352191d75f03eea4748a8c45;p=linux.git net: convert additional drivers to use phy_do_ioctl The first batch of driver conversions missed a few cases where we can use phy_do_ioctl too. Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c index 30b455013bf3d..bc273e0db7ff8 100644 --- a/drivers/net/ethernet/aurora/nb8800.c +++ b/drivers/net/ethernet/aurora/nb8800.c @@ -1005,18 +1005,13 @@ static int nb8800_stop(struct net_device *dev) return 0; } -static int nb8800_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - return phy_mii_ioctl(dev->phydev, rq, cmd); -} - static const struct net_device_ops nb8800_netdev_ops = { .ndo_open = nb8800_open, .ndo_stop = nb8800_stop, .ndo_start_xmit = nb8800_xmit, .ndo_set_mac_address = nb8800_set_mac_address, .ndo_set_rx_mode = nb8800_set_rx_mode, - .ndo_do_ioctl = nb8800_ioctl, + .ndo_do_ioctl = phy_do_ioctl, .ndo_validate_addr = eth_validate_addr, }; diff --git a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c index cdd7e5da4a74a..e9575887a4f8f 100644 --- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c @@ -790,9 +790,7 @@ static int octeon_mgmt_ioctl(struct net_device *netdev, case SIOCSHWTSTAMP: return octeon_mgmt_ioctl_hwtstamp(netdev, rq, cmd); default: - if (netdev->phydev) - return phy_mii_ioctl(netdev->phydev, rq, cmd); - return -EINVAL; + return phy_do_ioctl(netdev, rq, cmd); } } diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index 028e3e6222e94..578c31697cc0f 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -509,13 +509,6 @@ ltq_etop_change_mtu(struct net_device *dev, int new_mtu) return 0; } -static int -ltq_etop_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - /* TODO: mii-toll reports "No MII transceiver present!." ?!*/ - return phy_mii_ioctl(dev->phydev, rq, cmd); -} - static int ltq_etop_set_mac_address(struct net_device *dev, void *p) { @@ -616,7 +609,7 @@ static const struct net_device_ops ltq_eth_netdev_ops = { .ndo_stop = ltq_etop_stop, .ndo_start_xmit = ltq_etop_tx, .ndo_change_mtu = ltq_etop_change_mtu, - .ndo_do_ioctl = ltq_etop_ioctl, + .ndo_do_ioctl = phy_do_ioctl, .ndo_set_mac_address = ltq_etop_set_mac_address, .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = ltq_etop_set_multicast_list, diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 1a6877902dd65..7a0d785b826c6 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -1344,15 +1344,6 @@ static int pxa168_smi_write(struct mii_bus *bus, int phy_addr, int regnum, return 0; } -static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, - int cmd) -{ - if (dev->phydev) - return phy_mii_ioctl(dev->phydev, ifr, cmd); - - return -EOPNOTSUPP; -} - #ifdef CONFIG_NET_POLL_CONTROLLER static void pxa168_eth_netpoll(struct net_device *dev) { @@ -1387,7 +1378,7 @@ static const struct net_device_ops pxa168_eth_netdev_ops = { .ndo_set_rx_mode = pxa168_eth_set_rx_mode, .ndo_set_mac_address = pxa168_eth_set_mac_address, .ndo_validate_addr = eth_validate_addr, - .ndo_do_ioctl = pxa168_eth_do_ioctl, + .ndo_do_ioctl = phy_do_ioctl, .ndo_change_mtu = pxa168_eth_change_mtu, .ndo_tx_timeout = pxa168_eth_tx_timeout, #ifdef CONFIG_NET_POLL_CONTROLLER diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 7d3a1c0df09c2..c705743d69f7a 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -1939,9 +1939,7 @@ static int sxgbe_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) case SIOCGMIIPHY: case SIOCGMIIREG: case SIOCSMIIREG: - if (!dev->phydev) - return -EINVAL; - ret = phy_mii_ioctl(dev->phydev, rq, cmd); + ret = phy_do_ioctl(dev, rq, cmd); break; default: break; diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 6870a6ce76a64..495f6cfdbd91c 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -1740,12 +1740,6 @@ static int netsec_netdev_set_features(struct net_device *ndev, return 0; } -static int netsec_netdev_ioctl(struct net_device *ndev, struct ifreq *ifr, - int cmd) -{ - return phy_mii_ioctl(ndev->phydev, ifr, cmd); -} - static int netsec_xdp_xmit(struct net_device *ndev, int n, struct xdp_frame **frames, u32 flags) { @@ -1830,7 +1824,7 @@ static const struct net_device_ops netsec_netdev_ops = { .ndo_set_features = netsec_netdev_set_features, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, - .ndo_do_ioctl = netsec_netdev_ioctl, + .ndo_do_ioctl = phy_do_ioctl, .ndo_xdp_xmit = netsec_xdp_xmit, .ndo_bpf = netsec_xdp, };