From: Stefan Agner <stefan@agner.ch>
Date: Tue, 26 Jun 2018 14:52:42 +0000 (+0200)
Subject: ARM: dts: imx6qdl-colibri: move card detect to module device tree
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c768224360094b3e3b11c81a4163a9e1c7bd3336;p=linux.git

ARM: dts: imx6qdl-colibri: move card detect to module device tree

Muxing the card detect only in the carrier board device tree
overwrites the USDHC muxing in the module level device tree.
Move card detect to the module level device tree since this
is also a default pinout of the Colibri standard. If a carrier
board requires a different setting it still can overwrite the
nodes in the carrier board specific device tree.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 3dee3af1a4c16..9de45a7173561 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -221,9 +221,6 @@
 
 /* Colibri MMC */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mmc_cd>;
-	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 83d7c7d48c3f0..55c90c2fbf697 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -385,7 +385,8 @@
 /* Colibri MMC */
 &usdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
 	vqmmc-supply = <&reg_3p3v>;
 	bus-width = <4>;
 	voltage-ranges = <3300 3300>;