From: Michal Simek <michal.simek@xilinx.com>
Date: Thu, 31 May 2018 07:50:10 +0000 (+0200)
Subject: arm64: zynqmp: Setup default number of chipselects for zcu100
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c8e75cd490771ebfcfda29b1be27730b114cb0e7;p=linux.git

arm64: zynqmp: Setup default number of chipselects for zcu100

There is only one chipselect on each connector.
Define it directly in board dts file.
There should be an option to use more chipselects via gpios.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 2b3757dd74cca..a109e82982aee 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -250,11 +250,13 @@
 &spi0 { /* Low Speed connector */
 	status = "okay";
 	label = "LS-SPI0";
+	num-cs = <1>;
 };
 
 &spi1 { /* High Speed connector */
 	status = "okay";
 	label = "HS-SPI1";
+	num-cs = <1>;
 };
 
 &uart0 {