From: Yannic Moog <y.moog@phytec.de>
Date: Fri, 16 Jun 2023 09:50:10 +0000 (+0200)
Subject: arm64: dts: imx8mm-phyboard-polis: Set debug uart muxing to 0x140
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c933945fad116d062725b55c0de49867c431e1c0;p=linux.git

arm64: dts: imx8mm-phyboard-polis: Set debug uart muxing to 0x140

Set Pull Resistors Enable bit to put signal into a defined state.

Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index cfb811091b779..e6cc87cfe7a18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -424,8 +424,8 @@
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x40
-			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x40
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};