From: Shawn Guo Date: Mon, 22 Nov 2021 08:09:38 +0000 (+0800) Subject: pinctrl: qcom: qcm2290: Add GPIO wakeirq map X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c981a789446bc267ae984f080f271685189137d4;p=linux.git pinctrl: qcom: qcm2290: Add GPIO wakeirq map It adds the map of wakeup capable GPIOs and the pins at MPM wake controller on QCM2290, so that these GPIOs can wake up the SoC from vlow/vmin low power mode. Signed-off-by: Shawn Guo Link: https://lore.kernel.org/r/20211122080938.20623-1-shawn.guo@linaro.org Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/qcom/pinctrl-qcm2290.c b/drivers/pinctrl/qcom/pinctrl-qcm2290.c index 3f05c0a24b79e..aa9325f333fba 100644 --- a/drivers/pinctrl/qcom/pinctrl-qcm2290.c +++ b/drivers/pinctrl/qcom/pinctrl-qcm2290.c @@ -1083,6 +1083,16 @@ static const struct msm_pingroup qcm2290_groups[] = { [133] = SDC_QDSD_PINGROUP(sdc2_data, 0x86000, 9, 0), }; +static const struct msm_gpio_wakeirq_map qcm2290_mpm_map[] = { + { 0, 84 }, { 3, 75 }, { 4, 16 }, { 6, 59 }, { 8, 63 }, { 11, 17 }, + { 13, 18 }, { 14, 51 }, { 17, 20 }, { 18, 52 }, { 19, 53 }, { 24, 6 }, + { 25, 71 }, { 27, 73 }, { 28, 41 }, { 31, 27 }, { 32, 54 }, { 33, 55 }, + { 34, 56 }, { 35, 57 }, { 36, 58 }, { 39, 28 }, { 46, 29 }, { 62, 60 }, + { 63, 61 }, { 64, 62 }, { 69, 33 }, { 70, 34 }, { 72, 72 }, { 75, 35 }, + { 79, 36 }, { 80, 21 }, { 81, 38 }, { 86, 19 }, { 87, 42 }, { 88, 43 }, + { 89, 45 }, { 91, 74 }, { 94, 47 }, { 95, 48 }, { 96, 49 }, { 97, 50 }, +}; + static const struct msm_pinctrl_soc_data qcm2290_pinctrl = { .pins = qcm2290_pins, .npins = ARRAY_SIZE(qcm2290_pins), @@ -1091,6 +1101,8 @@ static const struct msm_pinctrl_soc_data qcm2290_pinctrl = { .groups = qcm2290_groups, .ngroups = ARRAY_SIZE(qcm2290_groups), .ngpios = 127, + .wakeirq_map = qcm2290_mpm_map, + .nwakeirq_map = ARRAY_SIZE(qcm2290_mpm_map), }; static int qcm2290_pinctrl_probe(struct platform_device *pdev)