From: Anson Huang Date: Wed, 5 Dec 2018 01:14:25 +0000 (+0000) Subject: ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c9a8cf0f1d6960911aa7303f95aef8a49a7e1f1f;p=linux.git ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus Add egalax touch screen support on i2c2 bus, it is connected to LVDS0, while the existing one on i2c3 bus is connected to LVDS1. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 6e46a195b3997..d7389b58ef2e6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -272,6 +272,16 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_egalax_int>; + interrupt-parent = <&gpio6>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + }; + ov5640: camera@3c { compatible = "ovti,ov5640"; pinctrl-names = "default"; @@ -498,6 +508,12 @@ >; }; + pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + >; + }; + pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1