From: Jonathan Cameron Date: Thu, 3 Jun 2021 18:06:12 +0000 (+0100) Subject: iio: light: si1145: Drop use of %hhx format specifier. X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c9d52c89e7384656c8492b82782707d539fbb509;p=linux.git iio: light: si1145: Drop use of %hhx format specifier. Since: commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") use of these format strings has been discouraged. As there are only a few such instances in IIO, this is part of a series clearing them out so they don't get copied into new drivers. Use the 0x02x form as the length specifier when used with # includes the 0x prefix and is very unlikely to be what was intended by the author. Signed-off-by: Jonathan Cameron Cc: Nathan Chancellor Reviewed-by: Nathan Chancellor Link: https://lore.kernel.org/r/20210603180612.3635250-5-jic23@kernel.org --- diff --git a/drivers/iio/light/si1145.c b/drivers/iio/light/si1145.c index 3fb52402fcc3b..e2abad48b9f4b 100644 --- a/drivers/iio/light/si1145.c +++ b/drivers/iio/light/si1145.c @@ -271,7 +271,7 @@ static int si1145_command(struct si1145_data *data, u8 cmd) if ((ret & ~SI1145_RSP_COUNTER_MASK) == 0) { if (ret == data->rsp_seq) { if (time_after(jiffies, stop_jiffies)) { - dev_warn(dev, "timeout on command %#02hhx\n", + dev_warn(dev, "timeout on command 0x%02x\n", cmd); ret = -ETIMEDOUT; break; @@ -291,12 +291,12 @@ static int si1145_command(struct si1145_data *data, u8 cmd) ret = -EIO; } else { if (ret == SI1145_RSP_INVALID_SETTING) { - dev_warn(dev, "INVALID_SETTING error on command %#02hhx\n", + dev_warn(dev, "INVALID_SETTING error on command 0x%02x\n", cmd); ret = -EINVAL; } else { /* All overflows are treated identically */ - dev_dbg(dev, "overflow, ret=%d, cmd=%#02hhx\n", + dev_dbg(dev, "overflow, ret=%d, cmd=0x%02x\n", ret, cmd); ret = -EOVERFLOW; } @@ -1299,10 +1299,10 @@ static int si1145_probe(struct i2c_client *client, SI1145_REG_SEQ_ID); if (ret < 0) return ret; - dev_info(&client->dev, "device ID part %#02hhx rev %#02hhx seq %#02hhx\n", + dev_info(&client->dev, "device ID part 0x%02x rev 0x%02x seq 0x%02x\n", part_id, rev_id, seq_id); if (part_id != data->part_info->part) { - dev_err(&client->dev, "part ID mismatch got %#02hhx, expected %#02x\n", + dev_err(&client->dev, "part ID mismatch got 0x%02x, expected 0x%02x\n", part_id, data->part_info->part); return -ENODEV; }