From: Manivannan Sadhasivam Date: Wed, 8 Mar 2023 08:24:17 +0000 (+0530) Subject: ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane} X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=c9f30e3dd92ba779c9cb8bb694ed7a8e2c9f0bb3;p=linux.git ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane} There is only one PCIe PHY in this SoC, so there is no need to add an index to the suffix. This also matches the naming convention of the PCIe controller. Reviewed-by: Konrad Dybcio Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230308082424.140224-7-manivannan.sadhasivam@linaro.org --- diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts index ad74ecc2a196e..81f33eba39e5f 100644 --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -242,7 +242,7 @@ status = "okay"; }; -&pcie0_phy { +&pcie_phy { status = "okay"; vdda-phy-supply = <&vreg_l1e_bb_1p2>; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index 7fa542249f1af..bd4edceaa1f41 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -335,7 +335,7 @@ resets = <&gcc GCC_PCIE_BCR>; reset-names = "core"; power-domains = <&gcc PCIE_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie_lane>; phy-names = "pciephy"; max-link-speed = <3>; num-lanes = <2>; @@ -343,7 +343,7 @@ status = "disabled"; }; - pcie0_phy: phy@1c07000 { + pcie_phy: phy@1c07000 { compatible = "qcom,sdx55-qmp-pcie-phy"; reg = <0x01c07000 0x1c4>; #address-cells = <1>; @@ -363,7 +363,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06000 { + pcie_lane: lanes@1c06000 { reg = <0x01c06000 0x104>, /* tx0 */ <0x01c06200 0x328>, /* rx0 */ <0x01c07200 0x1e8>, /* pcs */