From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Thu, 21 Mar 2024 11:16:26 +0000 (+0530)
Subject: arm64: dts: qcom: sm8550: Add PCIe bridge node
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=cc2ad77882fb9ff54d9f626df73057558dcd8322;p=linux.git

arm64: dts: qcom: sm8550: Add PCIe bridge node

On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240321-pcie-qcom-bridge-dts-v2-6-1eb790c53e43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 5adb9b178b05a..171fdb213cd94 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1774,6 +1774,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie0_phy: phy@1c06000 {
@@ -1887,6 +1897,16 @@
 			phy-names = "pciephy";
 
 			status = "disabled";
+
+			pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie1_phy: phy@1c0e000 {