From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Date: Fri, 10 Jun 2016 09:38:34 +0000 (+0100)
Subject: ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc file
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ccd140b574e28a8f622fa53d8bac99e585d7ced6;p=linux.git

ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc file

This patch moves out the sdcc1 pinctrl nodes out of board files to soc file,
so that it will be duplicated in other board files.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---

diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index 4102a98f475b6..ca683e56b8877 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -7,6 +7,26 @@
 		};
 	};
 
+	sdcc1_pins: sdcc1-pin-active {
+		clk {
+			pins = "sdc1_clk";
+			drive-strengh = <16>;
+			bias-disable;
+		};
+
+		cmd {
+			pins = "sdc1_cmd";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+
+		data {
+			pins = "sdc1_data";
+			drive-strengh = <10>;
+			bias-pull-up;
+		};
+	};
+
 	ps_hold: ps_hold {
 		mux {
 			pins = "gpio78";
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 06b3c76c3e410..93d08b9a77c93 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -70,25 +70,6 @@
 				};
 			};
 
-			sdcc1_pin_a: sdcc1-pin-active {
-				clk {
-					pins = "sdc1_clk";
-					drive-strengh = <16>;
-					bias-disable;
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-					drive-strengh = <10>;
-					bias-pull-up;
-				};
-
-				data {
-					pins = "sdc1_data";
-					drive-strengh = <10>;
-					bias-pull-up;
-				};
-			};
 
 			sdcc3_pin_a: sdcc3-pin-active {
 				clk {
@@ -417,9 +398,6 @@
 
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc1_pin_a>;
 			};
 
 			sdcc3: sdcc@12180000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index cf37d55f6e74f..ce7ce846615e8 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -859,6 +859,8 @@
 			sdcc1: sdcc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
+				pinctrl-names	= "default";
+				pinctrl-0	= <&sdcc1_pins>;
 				arm,primecell-periphid = <0x00051180>;
 				reg		= <0x12400000 0x2000>;
 				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;