From: Yogesh Narayan Gaur Date: Tue, 15 Jan 2019 12:00:20 +0000 (+0000) Subject: dt-bindings: spi: add binding file for NXP FlexSPI controller X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=cdbbb8ec5a8078630b777e0b56e3b39c1e7cd76a;p=linux.git dt-bindings: spi: add binding file for NXP FlexSPI controller Add binding file for NXP FlexSPI controller Signed-off-by: Yogesh Narayan Gaur Reviewed-by: Rob Herring Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt new file mode 100644 index 0000000000000..2cd67eb727d46 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt @@ -0,0 +1,39 @@ +* NXP Flex Serial Peripheral Interface (FSPI) + +Required properties: + - compatible : Should be "nxp,lx2160a-fspi" + - reg : First contains the register location and length, + Second contains the memory mapping address and length + - reg-names : Should contain the resource reg names: + - fspi_base: configuration register address space + - fspi_mmap: memory mapped address space + - interrupts : Should contain the interrupt for the device + +Required SPI slave node properties: + - reg : There are two buses (A and B) with two chip selects each. + This encodes to which bus and CS the flash is connected: + - <0>: Bus A, CS 0 + - <1>: Bus A, CS 1 + - <2>: Bus B, CS 0 + - <3>: Bus B, CS 1 + +Example showing the usage of two SPI NOR slave devices on bus A: + +fspi0: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + + mt35xu512aba0: flash@0 { + reg = <0>; + .... + }; + + mt35xu512aba1: flash@1 { + reg = <1>; + .... + }; +};