From: Yassine Oudjana <yassine.oudjana@gmail.com>
Date: Sun, 24 Jul 2022 14:04:17 +0000 (+0300)
Subject: arm64: dts: qcom: msm8996-xiaomi-scorpio, natrium: Use MSM8996 Pro
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=cea41be7ca66f0cdd0fa8e76ca799eed149d91c3;p=linux.git
arm64: dts: qcom: msm8996-xiaomi-scorpio, natrium: Use MSM8996 Pro
The Xiaomi Mi Note 2 has the MSM8996 Pro SoC. Rename the dts
to match, include msm8996pro.dtsi, and add the qcom,msm8996pro
compatible. To do that, the msm8996.dtsi include in msm8996-xiaomi-common
has to be moved to msm8996-xiaomi-gemini, the only device that needs it
included after this change.
Since MSM8996Pro is largely compatible with MSM8996, keep old compatible
too rather than insiting on qcom,msm8996pro only. This allows the code
that doesn't yet know about msm8996pro to continue supporting these
devices.
[DB: Dropped msm-id changes.]
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Applied the same change to Xiaomi Mi 5s Plus (natrium).]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-4-dmitry.baryshkov@linaro.org
---
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d7669a7cee9f7..e984dba8575a5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -37,8 +37,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-natrium.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996pro-xiaomi-natrium.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996pro-xiaomi-scorpio.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 78a1977d05937..d2637909a356b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -3,9 +3,6 @@
* Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
*/
-/dts-v1/;
-
-#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include <dt-bindings/input/input.h>
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index c8e84a934678e..40f964ae80db3 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include "msm8996.dtsi"
#include "msm8996-xiaomi-common.dtsi"
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
deleted file mode 100644
index 7526f8f473b55..0000000000000
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-natrium.dts
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw>
- */
-
-/dts-v1/;
-
-#include "msm8996-xiaomi-common.dtsi"
-#include "pmi8996.dtsi"
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-
-/ {
- model = "Xiaomi Mi 5s Plus";
- compatible = "xiaomi,natrium", "qcom,msm8996";
- chassis-type = "handset";
- qcom,msm-id = <305 0x10000>;
- qcom,board-id = <47 0>;
-};
-
-&adsp_pil {
- firmware-name = "qcom/msm8996/natrium/adsp.mbn";
-};
-
-&blsp2_i2c6 {
- touchscreen@20 {
- compatible = "syna,rmi4-i2c";
- reg = <0x20>;
- interrupt-parent = <&tlmm>;
- interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
- vdd-supply = <&vdd_3v2_tp>;
- syna,reset-delay-ms = <200>;
- syna,startup-delay-ms = <5>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&touchscreen_default>;
- pinctrl-1 = <&touchscreen_sleep>;
- };
-};
-
-&dsi0 {
- status = "okay";
-
- vdda-supply = <&vreg_l2a_1p25>;
- vcca-supply = <&vreg_l28a_0p925>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
- pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
-
- panel: panel@0 {
- compatible = "jdi,fhd-r63452";
- reg = <0>;
- reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
- backlight = <&pmi8994_wled>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in>;
-};
-
-&gpu {
- zap-shader {
- firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
- };
-};
-
-&mss_pil {
- firmware-name = "qcom/msm8996/natrium/mba.mbn",
- "qcom/msm8996/natrium/modem.mbn";
-};
-
-&pmi8994_wled {
- status = "okay";
-
- qcom,enabled-strings = <0 1>;
- qcom,switching-freq = <600>;
-};
-
-&q6asmdai {
- dai@0 {
- reg = <0>;
- };
-
- dai@1 {
- reg = <1>;
- };
-
- dai@2 {
- reg = <2>;
- };
-};
-
-&slpi_pil {
- firmware-name = "qcom/msm8996/natrium/slpi.mbn";
-};
-
-&sound {
- compatible = "qcom,apq8096-sndcard";
- model = "natrium";
- audio-routing = "RX_BIAS", "MCLK";
-
- mm1-dai-link {
- link-name = "MultiMedia1";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
- };
- };
-
- mm2-dai-link {
- link-name = "MultiMedia2";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
- };
- };
-
- mm3-dai-link {
- link-name = "MultiMedia3";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
- };
- };
-
- slim-dai-link {
- link-name = "SLIM Playback";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_6_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 6>;
- };
- };
-
- slimcap-dai-link {
- link-name = "SLIM Capture";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_0_TX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 1>;
- };
- };
-};
-
-&venus {
- firmware-name = "qcom/msm8996/natrium/venus.mbn";
-};
-
-&rpm_requests {
- regulators-0 {
- vreg_l3a_0p875: l3 {
- regulator-name = "vreg_l3a_0p875";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- };
- vreg_l11a_1p1: l11 {
- regulator-name = "vreg_l11a_1p1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
- vreg_l17a_2p8: l17 {
- regulator-name = "vreg_l17a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l18a_2p8: l18 {
- regulator-name = "vreg_l18a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l29a_2p8: l29 {
- regulator-name = "vreg_l29a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- };
-};
-
-&pm8994_gpios {
- gpio-line-names =
- "NC", /* GPIO_1 */
- "VOL_UP_N", /* GPIO_2 */
- "SPKR_ID", /* GPIO_3 */
- "PWM_HAPTICS", /* GPIO_4 */
- "INFARED_DRV", /* GPIO_5 */
- "NC", /* GPIO_6 */
- "KEYPAD_LED_EN_A", /* GPIO_7 */
- "WL_EN", /* GPIO_8 */
- "3P3_ENABLE", /* GPIO_9 */
- "NC", /* GPIO_10 */
- "NC", /* GPIO_11 */
- "NC", /* GPIO_12 */
- "NC", /* GPIO_13 */
- "NC", /* GPIO_14 */
- "DIVCLK1_CDC", /* GPIO_15 */
- "DIVCLK2_HAPTICS", /* GPIO_16 */
- "NC", /* GPIO_17 */
- "32KHz_CLK_IN", /* GPIO_18 */
- "BT_EN", /* GPIO_19 */
- "PMIC_SLB", /* GPIO_20 */
- "UIM_BATT_ALARM", /* GPIO_21 */
- "NC"; /* GPIO_22 */
-};
-
-&pm8994_mpps {
- gpio-line-names =
- "NC", /* MPP_1 */
- "CCI_TIMER1", /* MPP_2 */
- "PMIC_SLB", /* MPP_3 */
- "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
- "NC", /* MPP_5 */
- "NC", /* MPP_6 */
- "NC", /* MPP_7 */
- "NC"; /* MPP_8 */
-};
-
-&pmi8994_gpios {
- gpio-line-names =
- "NC", /* GPIO_1 */
- "SPKR_PA_EN", /* GPIO_2 */
- "NC", /* GPIO_3 */
- "NC", /* GPIO_4 */
- "NC", /* GPIO_5 */
- "NC", /* GPIO_6 */
- "NC", /* GPIO_7 */
- "NC", /* GPIO_8 */
- "NC", /* GPIO_9 */
- "NC"; /* GPIO_10 */
-};
-
-&tlmm {
- gpio-line-names =
- "ESE_SPI_MOSI", /* GPIO_0 */
- "ESE_SPI_MISO", /* GPIO_1 */
- "NC", /* GPIO_2 */
- "ESE_SPI_CLK", /* GPIO_3 */
- "MSM_UART_TX", /* GPIO_4 */
- "MSM_UART_RX", /* GPIO_5 */
- "NFC_I2C_SDA", /* GPIO_6 */
- "NFC_I2C_SCL", /* GPIO_7 */
- "LCD0_RESET_N", /* GPIO_8 */
- "NFC_IRQ", /* GPIO_9 */
- "LCD_TE", /* GPIO_10 */
- "LCD_ID_DET1", /* GPIO_11 */
- "NFC_DISABLE", /* GPIO_12 */
- "CAM_MCLK0", /* GPIO_13 */
- "CAM_MCLK1", /* GPIO_14 */
- "CAM_MCLK2", /* GPIO_15 */
- "ESE_PWR_REQ", /* GPIO_16 */
- "CCI_I2C_SDA0", /* GPIO_17 */
- "CCI_I2C_SCL0", /* GPIO_18 */
- "CCI_I2C_SDA1", /* GPIO_19 */
- "CCI_I2C_SCL1", /* GPIO_20 */
- "NFC_DWL_REQ", /* GPIO_21 */
- "CCI_TIMER1", /* GPIO_22 */
- "WEBCAM1_RESET_N", /* GPIO_23 */
- "ESE_IRQ", /* GPIO_24 */
- "NC", /* GPIO_25 */
- "WEBCAM1_STANDBY", /* GPIO_26 */
- "NC", /* GPIO_27 */
- "NC", /* GPIO_28 */
- "NC", /* GPIO_29 */
- "CAM_VDD_1P2_EN_2", /* GPIO_30 */
- "CAM_RESET_0", /* GPIO_31 */
- "CAM_RESET_1", /* GPIO_32 */
- "NC", /* GPIO_33 */
- "NC", /* GPIO_34 */
- "PCI_E0_RST_N", /* GPIO_35 */
- "PCI_E0_CLKREQ_N", /* GPIO_36 */
- "PCI_E0_WAKE", /* GPIO_37 */
- "CHARGER_INT", /* GPIO_38 */
- "CHARGER_RESET", /* GPIO_39 */
- "NC", /* GPIO_40 */
- "QCA_UART_TXD", /* GPIO_41 */
- "QCA_UART_RXD", /* GPIO_42 */
- "QCA_UART_CTS", /* GPIO_43 */
- "QCA_UART_RTS", /* GPIO_44 */
- "MAWC_UART_TX", /* GPIO_45 */
- "MAWC_UART_RX", /* GPIO_46 */
- "NC", /* GPIO_47 */
- "NC", /* GPIO_48 */
- "NC", /* GPIO_49 */
- "FP_SPI_RST", /* GPIO_50 */
- "TYPEC_I2C_SDA", /* GPIO_51 */
- "TYPEC_I2C_SCL", /* GPIO_52 */
- "CODEC_INT2_N", /* GPIO_53 */
- "CODEC_INT1_N", /* GPIO_54 */
- "APPS_I2C7_SDA", /* GPIO_55 */
- "APPS_I2C7_SCL", /* GPIO_56 */
- "FORCE_USB_BOOT", /* GPIO_57 */
- "NC", /* GPIO_58 */
- "NC", /* GPIO_59 */
- "NC", /* GPIO_60 */
- "NC", /* GPIO_61 */
- "ESE_RSTN", /* GPIO_62 */
- "TYPEC_INT", /* GPIO_63 */
- "CODEC_RESET_N", /* GPIO_64 */
- "PCM_CLK", /* GPIO_65 */
- "PCM_SYNC", /* GPIO_66 */
- "PCM_DIN", /* GPIO_67 */
- "PCM_DOUT", /* GPIO_68 */
- "CDC_44K1_CLK", /* GPIO_69 */
- "SLIMBUS_CLK", /* GPIO_70 */
- "SLIMBUS_DATA0", /* GPIO_71 */
- "SLIMBUS_DATA1", /* GPIO_72 */
- "LDO_5V_IN_EN", /* GPIO_73 */
- "TYPEC_EN_N", /* GPIO_74 */
- "NC", /* GPIO_75 */
- "NC", /* GPIO_76 */
- "NC", /* GPIO_77 */
- "NC", /* GPIO_78 */
- "NC", /* GPIO_79 */
- "SENSOR_RESET_N", /* GPIO_80 */
- "FP_SPI_MOSI", /* GPIO_81 */
- "FP_SPI_MISO", /* GPIO_82 */
- "FP_SPI_CS_N", /* GPIO_83 */
- "FP_SPI_CLK", /* GPIO_84 */
- "NC", /* GPIO_85 */
- "CAM_VDD_1P2_EN", /* GPIO_86 */
- "MSM_TS_I2C_SDA", /* GPIO_87 */
- "MSM_TS_I2C_SCL", /* GPIO_88 */
- "TS_RESOUT_N", /* GPIO_89 */
- "ESE_SPI_CS_N", /* GPIO_90 */
- "NC", /* GPIO_91 */
- "CAM2_AVDD_EN", /* GPIO_92 */
- "CAM2_VCM_EN", /* GPIO_93 */
- "NC", /* GPIO_94 */
- "NC", /* GPIO_95 */
- "NC", /* GPIO_96 */
- "GRFC_0", /* GPIO_97 */
- "GRFC_1", /* GPIO_98 */
- "NC", /* GPIO_99 */
- "GRFC_3", /* GPIO_100 */
- "GRFC_4", /* GPIO_101 */
- "GRFC_5", /* GPIO_102 */
- "NC", /* GPIO_103 */
- "GRFC_7", /* GPIO_104 */
- "UIM2_DATA", /* GPIO_105 */
- "UIM2_CLK", /* GPIO_106 */
- "UIM2_RESET", /* GPIO_107 */
- "UIM2_PRESENT", /* GPIO_108 */
- "UIM1_DATA", /* GPIO_109 */
- "UIM1_CLK", /* GPIO_110 */
- "UIM1_RESET", /* GPIO_111 */
- "UIM1_PRESENT", /* GPIO_112 */
- "UIM_BATT_ALARM", /* GPIO_113 */
- "GRFC_8", /* GPIO_114 */
- "GRFC_9", /* GPIO_115 */
- "TX_GTR_THRES", /* GPIO_116 */
- "ACCEL_INT", /* GPIO_117 */
- "GYRO_INT", /* GPIO_118 */
- "COMPASS_INT", /* GPIO_119 */
- "PROXIMITY_INT_N", /* GPIO_120 */
- "FP_IRQ", /* GPIO_121 */
- "P_SENSE", /* GPIO_122 */
- "HALL_INTR2", /* GPIO_123 */
- "HALL_INTR1", /* GPIO_124 */
- "TS_INT_N", /* GPIO_125 */
- "NC", /* GPIO_126 */
- "GRFC_11", /* GPIO_127 */
- "NC", /* GPIO_128 */
- "EXT_GPS_LNA_EN", /* GPIO_129 */
- "NC", /* GPIO_130 */
- "LCD_ID_DET2", /* GPIO_131 */
- "LCD_TE2", /* GPIO_132 */
- "GRFC_14", /* GPIO_133 */
- "GSM_TX2_PHASE_D", /* GPIO_134 */
- "NC", /* GPIO_135 */
- "GRFC_15", /* GPIO_136 */
- "RFFE3_DATA", /* GPIO_137 */
- "RFFE3_CLK", /* GPIO_138 */
- "NC", /* GPIO_139 */
- "NC", /* GPIO_140 */
- "RFFE5_DATA", /* GPIO_141 */
- "RFFE5_CLK", /* GPIO_142 */
- "NC", /* GPIO_143 */
- "COEX_UART_TX", /* GPIO_144 */
- "COEX_UART_RX", /* GPIO_145 */
- "RFFE2_DATA", /* GPIO_146 */
- "RFFE2_CLK", /* GPIO_147 */
- "RFFE1_DATA", /* GPIO_148 */
- "RFFE1_CLK"; /* GPIO_149 */
-
- touchscreen_default: touchscreen-default {
- pins = "gpio89", "gpio125";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- touchscreen_sleep: touchscreen-sleep {
- pins = "gpio89", "gpio125";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
deleted file mode 100644
index b751cbbf1a232..0000000000000
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
+++ /dev/null
@@ -1,498 +0,0 @@
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
- */
-
-/dts-v1/;
-
-#include "msm8996-xiaomi-common.dtsi"
-#include "pmi8996.dtsi"
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-#include <dt-bindings/sound/qcom,wcd9335.h>
-
-/ {
- model = "Xiaomi Mi Note 2";
- compatible = "xiaomi,scorpio", "qcom,msm8996";
- chassis-type = "handset";
- qcom,msm-id = <305 0x10000>;
- qcom,board-id = <34 0>;
-
- chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- framebuffer0: framebuffer@83401000 {
- compatible = "simple-framebuffer";
- reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>;
- width = <1080>;
- height = <1920>;
- stride = <(1080 * 3)>;
- format = "r8g8b8";
-
- /* DSI0 and MDP SMMU clocks */
- clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MMSS_MMAGIC_AHB_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MMSS_MISC_AHB_CLK>,
- <&mmcc MDSS_BYTE0_CLK>,
- <&mmcc MDSS_PCLK0_CLK>,
- <&mmcc MDSS_ESC0_CLK>,
- <&mmcc SMMU_MDP_AHB_CLK>,
- <&mmcc SMMU_MDP_AXI_CLK>;
-
- /* MDSS power domain */
- power-domains = <&mmcc MDSS_GDSC>;
- };
- };
-
- reserved-memory {
- cont_splash_mem: memory@83401000 {
- reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>;
- no-map;
- };
- };
-};
-
-&adsp_pil {
- firmware-name = "qcom/msm8996/scorpio/adsp.mbn";
-};
-
-&blsp2_i2c6 {
- touchkey: touchkey@28 {
- compatible = "cypress,sf3155";
- reg = <0x28>;
- interrupt-parent = <&tlmm>;
- interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
- avdd-supply = <&vreg_l6a_1p8>;
- vdd-supply = <&vdd_3v2_tp>;
- linux,keycodes = <KEY_BACK KEY_MENU>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&touchkey_default>;
- pinctrl-1 = <&touchkey_sleep>;
- };
-
- touchscreen: atmel-mxt-ts@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- interrupt-parent = <&tlmm>;
- interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
- vdda-supply = <&vreg_l6a_1p8>;
- vdd-supply = <&vdd_3v2_tp>;
- reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&touchscreen_default>;
- pinctrl-1 = <&touchscreen_sleep>;
- };
-};
-
-&gpu {
- zap-shader {
- firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn";
- };
-};
-
-&mdp_smmu {
- /*
- * Probing this SMMU causes a crash due to writing to some secure
- * registers. Disable it for now.
- */
- status = "disabled";
-};
-
-&mdss {
- /*
- * MDSS depends on the MDP SMMU, and probing it alters the bootloader
- * configured framebuffer used by simplefb. Disable it for now.
- */
- status = "disabled";
-};
-
-&mss_pil {
- firmware-name = "qcom/msm8996/scorpio/mba.mbn",
- "qcom/msm8996/scorpio/modem.mbn";
-};
-
-&pm8994_lpg {
- pinctrl-names = "default";
- pinctrl-0 = <&keypad_default>;
-
- led@3 {
- reg = <3>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- function-enumerator = <1>;
- };
-
- led@6 {
- reg = <6>;
- color = <LED_COLOR_ID_WHITE>;
- function = LED_FUNCTION_KBD_BACKLIGHT;
- function-enumerator = <0>;
- };
-};
-
-&q6asmdai {
- dai@0 {
- reg = <0>;
- };
-
- dai@1 {
- reg = <1>;
- };
-
- dai@2 {
- reg = <2>;
- };
-};
-
-&slpi_pil {
- firmware-name = "qcom/msm8996/scorpio/slpi.mbn";
-};
-
-&sound {
- compatible = "qcom,apq8096-sndcard";
- model = "scorpio";
- audio-routing = "RX_BIAS", "MCLK";
-
- mm1-dai-link {
- link-name = "MultiMedia1";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
- };
- };
-
- mm2-dai-link {
- link-name = "MultiMedia2";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
- };
- };
-
- mm3-dai-link {
- link-name = "MultiMedia3";
- cpu {
- sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
- };
- };
-
- slim-dai-link {
- link-name = "SLIM Playback";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_6_RX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 AIF4_PB>;
- };
- };
-
- slimcap-dai-link {
- link-name = "SLIM Capture";
- cpu {
- sound-dai = <&q6afedai SLIMBUS_0_TX>;
- };
-
- platform {
- sound-dai = <&q6routing>;
- };
-
- codec {
- sound-dai = <&wcd9335 AIF1_CAP>;
- };
- };
-};
-
-&venus {
- firmware-name = "qcom/msm8996/scorpio/venus.mbn";
-};
-
-&rpm_requests {
- regulators-0 {
- vreg_l3a_0p875: l3 {
- regulator-name = "vreg_l3a_0p875";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- };
- vreg_l11a_1p1: l11 {
- regulator-name = "vreg_l11a_1p1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
- vreg_l17a_2p8: l17 {
- regulator-name = "vreg_l17a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l18a_2p8: l18 {
- regulator-name = "vreg_l18a_2p8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
- vreg_l22a_3p0: l22 {
- regulator-name = "vreg_l22a_3p0";
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <3500000>;
- };
- vreg_l29a_2p7: l29 {
- regulator-name = "vreg_l29a_2p7";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
- };
-};
-
-&vdd_gfx {
- regulator-max-microvolt = <1065000>;
-};
-
-&pm8994_gpios {
- gpio-line-names =
- "NC", /* GPIO_1 */
- "VOL_UP_N", /* GPIO_2 */
- "SPKR_ID", /* GPIO_3 */
- "PWM_HAPTICS", /* GPIO_4 */
- "INFARED_DRV", /* GPIO_5 */
- "NC", /* GPIO_6 */
- "KEYPAD_LED_EN_A", /* GPIO_7 */
- "WL_EN", /* GPIO_8 */
- "3P3_ENABLE", /* GPIO_9 */
- "KEYPAD_LED_EN_B", /* GPIO_10 */
- "FP_ID", /* GPIO_11 */
- "NC", /* GPIO_12 */
- "NC", /* GPIO_13 */
- "NC", /* GPIO_14 */
- "DIVCLK1_CDC", /* GPIO_15 */
- "DIVCLK2_HAPTICS", /* GPIO_16 */
- "NC", /* GPIO_17 */
- "32KHz_CLK_IN", /* GPIO_18 */
- "BT_EN", /* GPIO_19 */
- "PMIC_SLB", /* GPIO_20 */
- "UIM_BATT_ALARM", /* GPIO_21 */
- "NC"; /* GPIO_22 */
-
- keypad_default: keypad-default-state {
- pins = "gpio7", "gpio10";
- function = PMIC_GPIO_FUNC_FUNC1;
- output-low;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- power-source = <PM8994_GPIO_S4>;
- bias-disable;
- };
-};
-
-&pm8994_mpps {
- gpio-line-names =
- "VREF_SDC_UIM_APC", /* MPP_1 */
- "NC", /* MPP_2 */
- "VREF_DACX", /* MPP_3 */
- "NC", /* MPP_4 */
- "NC", /* MPP_5 */
- "STAT_SMB1351", /* MPP_6 */
- "NC", /* MPP_7 */
- "NC"; /* MPP_8 */
-};
-
-&pmi8994_gpios {
- gpio-line-names =
- "NC", /* GPIO_1 */
- "SPKR_PA_RST", /* GPIO_2 */
- "NC", /* GPIO_3 */
- "NC", /* GPIO_4 */
- "NC", /* GPIO_5 */
- "NC", /* GPIO_6 */
- "NC", /* GPIO_7 */
- "NC", /* GPIO_8 */
- "NC", /* GPIO_9 */
- "NC"; /* GPIO_10 */
-};
-
-&tlmm {
- gpio-line-names =
- "ESE_SPI_MOSI", /* GPIO_0 */
- "ESE_SPI_MISO", /* GPIO_1 */
- "NC", /* GPIO_2 */
- "ESE_SPI_CLK", /* GPIO_3 */
- "MSM_UART_TX", /* GPIO_4 */
- "MSM_UART_RX", /* GPIO_5 */
- "NFC_I2C_SDA", /* GPIO_6 */
- "NFC_I2C_SCL", /* GPIO_7 */
- "OLED_RESET_N", /* GPIO_8 */
- "NFC_IRQ", /* GPIO_9 */
- "OLED_TE", /* GPIO_10 */
- "OLED_ID_DET1", /* GPIO_11 */
- "NFC_DISABLE", /* GPIO_12 */
- "CAM_MCLK0", /* GPIO_13 */
- "OLED_ID_DET2", /* GPIO_14 */
- "CAM_MCLK2", /* GPIO_15 */
- "ESE_PWR_REQ", /* GPIO_16 */
- "CCI_I2C_SDA0", /* GPIO_17 */
- "CCI_I2C_SCL0", /* GPIO_18 */
- "CCI_I2C_SDA1", /* GPIO_19 */
- "CCI_I2C_SCL1", /* GPIO_20 */
- "NFC_DWL_REQ", /* GPIO_21 */
- "CCI_TIMER1", /* GPIO_22 */
- "WEBCAM1_RESET_N", /* GPIO_23 */
- "ESE_IRQ", /* GPIO_24 */
- "NC", /* GPIO_25 */
- "WEBCAM1_STANDBY", /* GPIO_26 */
- "NC", /* GPIO_27 */
- "NC", /* GPIO_28 */
- "OLED_ERR_FG", /* GPIO_29 */
- "CAM1_RST_N", /* GPIO_30 */
- "HIFI_SW_MUTE", /* GPIO_31 */
- "NC", /* GPIO_32 */
- "NC", /* GPIO_33 */
- "FP_DOME_SW", /* GPIO_34 */
- "PCI_E0_RST_N", /* GPIO_35 */
- "PCI_E0_CLKREQ_N", /* GPIO_36 */
- "PCI_E0_WAKE", /* GPIO_37 */
- "OV_PWDN", /* GPIO_38 */
- "NC", /* GPIO_39 */
- "VDDR_1P6_EN", /* GPIO_40 */
- "QCA_UART_TXD", /* GPIO_41 */
- "QCA_UART_RXD", /* GPIO_42 */
- "QCA_UART_CTS", /* GPIO_43 */
- "QCA_UART_RTS", /* GPIO_44 */
- "MAWC_UART_TX", /* GPIO_45 */
- "MAWC_UART_RX", /* GPIO_46 */
- "NC", /* GPIO_47 */
- "NC", /* GPIO_48 */
- "AUDIO_SWITCH_EN", /* GPIO_49 */
- "FP_SPI_RST", /* GPIO_50 */
- "TYPEC_I2C_SDA", /* GPIO_51 */
- "TYPEC_I2C_SCL", /* GPIO_52 */
- "CODEC_INT2_N", /* GPIO_53 */
- "CODEC_INT1_N", /* GPIO_54 */
- "APPS_I2C7_SDA", /* GPIO_55 */
- "APPS_I2C7_SCL", /* GPIO_56 */
- "FORCE_USB_BOOT", /* GPIO_57 */
- "SPKR_I2S_BCK", /* GPIO_58 */
- "SPKR_I2S_WS", /* GPIO_59 */
- "SPKR_I2S_DOUT", /* GPIO_60 */
- "SPKR_I2S_DIN", /* GPIO_61 */
- "ESE_RSTN", /* GPIO_62 */
- "TYPEC_INT", /* GPIO_63 */
- "CODEC_RESET_N", /* GPIO_64 */
- "PCM_CLK", /* GPIO_65 */
- "PCM_SYNC", /* GPIO_66 */
- "PCM_DIN", /* GPIO_67 */
- "PCM_DOUT", /* GPIO_68 */
- "CDC_44K1_CLK", /* GPIO_69 */
- "SLIMBUS_CLK", /* GPIO_70 */
- "SLIMBUS_DATA0", /* GPIO_71 */
- "SLIMBUS_DATA1", /* GPIO_72 */
- "LDO_5V_IN_EN", /* GPIO_73 */
- "NC", /* GPIO_74 */
- "TSP_RST_N", /* GPIO_75 */
- "NC", /* GPIO_76 */
- "TOUCHKEY_INT", /* GPIO_77 */
- "SPKR_I2S_MCLK", /* GPIO_78 */
- "SPKR_PA_INT", /* GPIO_79 */
- "SENSOR_RESET_N", /* GPIO_80 */
- "FP_SPI_MOSI", /* GPIO_81 */
- "FP_SPI_MISO", /* GPIO_82 */
- "FP_SPI_CS_N", /* GPIO_83 */
- "FP_SPI_CLK", /* GPIO_84 */
- "HIFI_SD", /* GPIO_85 */
- "CAM_VDD_1P05_EN", /* GPIO_86 */
- "MSM_TS_I2C_SDA", /* GPIO_87 */
- "MSM_TS_I2C_SCL", /* GPIO_88 */
- "NC", /* GPIO_89 */
- "ESE_SPI_CS_N", /* GPIO_90 */
- "NC", /* GPIO_91 */
- "NC", /* GPIO_92 */
- "NC", /* GPIO_93 */
- "NC", /* GPIO_94 */
- "NC", /* GPIO_95 */
- "NC", /* GPIO_96 */
- "GRFC_0", /* GPIO_97 */
- "GRFC_1", /* GPIO_98 */
- "NC", /* GPIO_99 */
- "GRFC_3", /* GPIO_100 */
- "GRFC_4", /* GPIO_101 */
- "NC", /* GPIO_102 */
- "NC", /* GPIO_103 */
- "GRFC_7", /* GPIO_104 */
- "UIM2_DATA", /* GPIO_105 */
- "UIM2_CLK", /* GPIO_106 */
- "UIM2_RESET", /* GPIO_107 */
- "UIM2_PRESENT", /* GPIO_108 */
- "UIM1_DATA", /* GPIO_109 */
- "UIM1_CLK", /* GPIO_110 */
- "UIM1_RESET", /* GPIO_111 */
- "UIM1_PRESENT", /* GPIO_112 */
- "UIM_BATT_ALARM", /* GPIO_113 */
- "GRFC_8", /* GPIO_114 */
- "GRFC_9", /* GPIO_115 */
- "TX_GTR_THRES", /* GPIO_116 */
- "ACC_INT", /* GPIO_117 */
- "GYRO_INT", /* GPIO_118 */
- "COMPASS_INT", /* GPIO_119 */
- "PROXIMITY_INT_N", /* GPIO_120 */
- "FP_IRQ", /* GPIO_121 */
- "TSP_TA", /* GPIO_122 */
- "HALL_INTR2", /* GPIO_123 */
- "HALL_INTR1", /* GPIO_124 */
- "TS_INT_N", /* GPIO_125 */
- "NC", /* GPIO_126 */
- "GRFC_11", /* GPIO_127 */
- "HIFI_PWR_EN", /* GPIO_128 */
- "EXT_GPS_LNA_EN", /* GPIO_129 */
- "NC", /* GPIO_130 */
- "NC", /* GPIO_131 */
- "NC", /* GPIO_132 */
- "GRFC_14", /* GPIO_133 */
- "GSM_TX2_PHASE_D", /* GPIO_134 */
- "HIFI_SW_SEL", /* GPIO_135 */
- "GRFC_15", /* GPIO_136 */
- "RFFE3_DATA", /* GPIO_137 */
- "RFFE3_CLK", /* GPIO_138 */
- "NC", /* GPIO_139 */
- "NC", /* GPIO_140 */
- "RFFE5_DATA", /* GPIO_141 */
- "RFFE5_CLK", /* GPIO_142 */
- "NC", /* GPIO_143 */
- "COEX_UART_TX", /* GPIO_144 */
- "COEX_UART_RX", /* GPIO_145 */
- "RFFE2_DATA", /* GPIO_146 */
- "RFFE2_CLK", /* GPIO_147 */
- "RFFE1_DATA", /* GPIO_148 */
- "RFFE1_CLK"; /* GPIO_149 */
-
- touchkey_default: touchkey_default {
- pins = "gpio77";
- function = "gpio";
- drive-strength = <16>;
- bias-pull-up;
- };
-
- touchkey_sleep: touchkey_sleep {
- pins = "gpio77";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- touchscreen_default: touchscreen_default {
- pins = "gpio75", "gpio125";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- touchscreen_sleep: touchscreen_sleep {
- pins = "gpio75", "gpio125";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
new file mode 100644
index 0000000000000..b18ee5c1f6789
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw>
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+/ {
+ model = "Xiaomi Mi 5s Plus";
+ compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996";
+ chassis-type = "handset";
+ qcom,msm-id = <305 0x10000>;
+ qcom,board-id = <47 0>;
+};
+
+&adsp_pil {
+ firmware-name = "qcom/msm8996/natrium/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&vdd_3v2_tp>;
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <5>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-1 = <&touchscreen_sleep>;
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&vreg_l2a_1p25>;
+ vcca-supply = <&vreg_l28a_0p925>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+ pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+
+ panel: panel@0 {
+ compatible = "jdi,fhd-r63452";
+ reg = <0>;
+ reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ backlight = <&pmi8994_wled>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/msm8996/natrium/mba.mbn",
+ "qcom/msm8996/natrium/modem.mbn";
+};
+
+&pmi8994_wled {
+ status = "okay";
+
+ qcom,enabled-strings = <0 1>;
+ qcom,switching-freq = <600>;
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
+&slpi_pil {
+ firmware-name = "qcom/msm8996/natrium/slpi.mbn";
+};
+
+&sound {
+ compatible = "qcom,apq8096-sndcard";
+ model = "natrium";
+ audio-routing = "RX_BIAS", "MCLK";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_6_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 6>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 1>;
+ };
+ };
+};
+
+&venus {
+ firmware-name = "qcom/msm8996/natrium/venus.mbn";
+};
+
+&rpm_requests {
+ regulators-0 {
+ vreg_l3a_0p875: l3 {
+ regulator-name = "vreg_l3a_0p875";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ vreg_l11a_1p1: l11 {
+ regulator-name = "vreg_l11a_1p1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+ vreg_l17a_2p8: l17 {
+ regulator-name = "vreg_l17a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l18a_2p8: l18 {
+ regulator-name = "vreg_l18a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l29a_2p8: l29 {
+ regulator-name = "vreg_l29a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
+&pm8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "VOL_UP_N", /* GPIO_2 */
+ "SPKR_ID", /* GPIO_3 */
+ "PWM_HAPTICS", /* GPIO_4 */
+ "INFARED_DRV", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "KEYPAD_LED_EN_A", /* GPIO_7 */
+ "WL_EN", /* GPIO_8 */
+ "3P3_ENABLE", /* GPIO_9 */
+ "NC", /* GPIO_10 */
+ "NC", /* GPIO_11 */
+ "NC", /* GPIO_12 */
+ "NC", /* GPIO_13 */
+ "NC", /* GPIO_14 */
+ "DIVCLK1_CDC", /* GPIO_15 */
+ "DIVCLK2_HAPTICS", /* GPIO_16 */
+ "NC", /* GPIO_17 */
+ "32KHz_CLK_IN", /* GPIO_18 */
+ "BT_EN", /* GPIO_19 */
+ "PMIC_SLB", /* GPIO_20 */
+ "UIM_BATT_ALARM", /* GPIO_21 */
+ "NC"; /* GPIO_22 */
+};
+
+&pm8994_mpps {
+ gpio-line-names =
+ "NC", /* MPP_1 */
+ "CCI_TIMER1", /* MPP_2 */
+ "PMIC_SLB", /* MPP_3 */
+ "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
+ "NC", /* MPP_5 */
+ "NC", /* MPP_6 */
+ "NC", /* MPP_7 */
+ "NC"; /* MPP_8 */
+};
+
+&pmi8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "SPKR_PA_EN", /* GPIO_2 */
+ "NC", /* GPIO_3 */
+ "NC", /* GPIO_4 */
+ "NC", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "NC", /* GPIO_7 */
+ "NC", /* GPIO_8 */
+ "NC", /* GPIO_9 */
+ "NC"; /* GPIO_10 */
+};
+
+&tlmm {
+ gpio-line-names =
+ "ESE_SPI_MOSI", /* GPIO_0 */
+ "ESE_SPI_MISO", /* GPIO_1 */
+ "NC", /* GPIO_2 */
+ "ESE_SPI_CLK", /* GPIO_3 */
+ "MSM_UART_TX", /* GPIO_4 */
+ "MSM_UART_RX", /* GPIO_5 */
+ "NFC_I2C_SDA", /* GPIO_6 */
+ "NFC_I2C_SCL", /* GPIO_7 */
+ "LCD0_RESET_N", /* GPIO_8 */
+ "NFC_IRQ", /* GPIO_9 */
+ "LCD_TE", /* GPIO_10 */
+ "LCD_ID_DET1", /* GPIO_11 */
+ "NFC_DISABLE", /* GPIO_12 */
+ "CAM_MCLK0", /* GPIO_13 */
+ "CAM_MCLK1", /* GPIO_14 */
+ "CAM_MCLK2", /* GPIO_15 */
+ "ESE_PWR_REQ", /* GPIO_16 */
+ "CCI_I2C_SDA0", /* GPIO_17 */
+ "CCI_I2C_SCL0", /* GPIO_18 */
+ "CCI_I2C_SDA1", /* GPIO_19 */
+ "CCI_I2C_SCL1", /* GPIO_20 */
+ "NFC_DWL_REQ", /* GPIO_21 */
+ "CCI_TIMER1", /* GPIO_22 */
+ "WEBCAM1_RESET_N", /* GPIO_23 */
+ "ESE_IRQ", /* GPIO_24 */
+ "NC", /* GPIO_25 */
+ "WEBCAM1_STANDBY", /* GPIO_26 */
+ "NC", /* GPIO_27 */
+ "NC", /* GPIO_28 */
+ "NC", /* GPIO_29 */
+ "CAM_VDD_1P2_EN_2", /* GPIO_30 */
+ "CAM_RESET_0", /* GPIO_31 */
+ "CAM_RESET_1", /* GPIO_32 */
+ "NC", /* GPIO_33 */
+ "NC", /* GPIO_34 */
+ "PCI_E0_RST_N", /* GPIO_35 */
+ "PCI_E0_CLKREQ_N", /* GPIO_36 */
+ "PCI_E0_WAKE", /* GPIO_37 */
+ "CHARGER_INT", /* GPIO_38 */
+ "CHARGER_RESET", /* GPIO_39 */
+ "NC", /* GPIO_40 */
+ "QCA_UART_TXD", /* GPIO_41 */
+ "QCA_UART_RXD", /* GPIO_42 */
+ "QCA_UART_CTS", /* GPIO_43 */
+ "QCA_UART_RTS", /* GPIO_44 */
+ "MAWC_UART_TX", /* GPIO_45 */
+ "MAWC_UART_RX", /* GPIO_46 */
+ "NC", /* GPIO_47 */
+ "NC", /* GPIO_48 */
+ "NC", /* GPIO_49 */
+ "FP_SPI_RST", /* GPIO_50 */
+ "TYPEC_I2C_SDA", /* GPIO_51 */
+ "TYPEC_I2C_SCL", /* GPIO_52 */
+ "CODEC_INT2_N", /* GPIO_53 */
+ "CODEC_INT1_N", /* GPIO_54 */
+ "APPS_I2C7_SDA", /* GPIO_55 */
+ "APPS_I2C7_SCL", /* GPIO_56 */
+ "FORCE_USB_BOOT", /* GPIO_57 */
+ "NC", /* GPIO_58 */
+ "NC", /* GPIO_59 */
+ "NC", /* GPIO_60 */
+ "NC", /* GPIO_61 */
+ "ESE_RSTN", /* GPIO_62 */
+ "TYPEC_INT", /* GPIO_63 */
+ "CODEC_RESET_N", /* GPIO_64 */
+ "PCM_CLK", /* GPIO_65 */
+ "PCM_SYNC", /* GPIO_66 */
+ "PCM_DIN", /* GPIO_67 */
+ "PCM_DOUT", /* GPIO_68 */
+ "CDC_44K1_CLK", /* GPIO_69 */
+ "SLIMBUS_CLK", /* GPIO_70 */
+ "SLIMBUS_DATA0", /* GPIO_71 */
+ "SLIMBUS_DATA1", /* GPIO_72 */
+ "LDO_5V_IN_EN", /* GPIO_73 */
+ "TYPEC_EN_N", /* GPIO_74 */
+ "NC", /* GPIO_75 */
+ "NC", /* GPIO_76 */
+ "NC", /* GPIO_77 */
+ "NC", /* GPIO_78 */
+ "NC", /* GPIO_79 */
+ "SENSOR_RESET_N", /* GPIO_80 */
+ "FP_SPI_MOSI", /* GPIO_81 */
+ "FP_SPI_MISO", /* GPIO_82 */
+ "FP_SPI_CS_N", /* GPIO_83 */
+ "FP_SPI_CLK", /* GPIO_84 */
+ "NC", /* GPIO_85 */
+ "CAM_VDD_1P2_EN", /* GPIO_86 */
+ "MSM_TS_I2C_SDA", /* GPIO_87 */
+ "MSM_TS_I2C_SCL", /* GPIO_88 */
+ "TS_RESOUT_N", /* GPIO_89 */
+ "ESE_SPI_CS_N", /* GPIO_90 */
+ "NC", /* GPIO_91 */
+ "CAM2_AVDD_EN", /* GPIO_92 */
+ "CAM2_VCM_EN", /* GPIO_93 */
+ "NC", /* GPIO_94 */
+ "NC", /* GPIO_95 */
+ "NC", /* GPIO_96 */
+ "GRFC_0", /* GPIO_97 */
+ "GRFC_1", /* GPIO_98 */
+ "NC", /* GPIO_99 */
+ "GRFC_3", /* GPIO_100 */
+ "GRFC_4", /* GPIO_101 */
+ "GRFC_5", /* GPIO_102 */
+ "NC", /* GPIO_103 */
+ "GRFC_7", /* GPIO_104 */
+ "UIM2_DATA", /* GPIO_105 */
+ "UIM2_CLK", /* GPIO_106 */
+ "UIM2_RESET", /* GPIO_107 */
+ "UIM2_PRESENT", /* GPIO_108 */
+ "UIM1_DATA", /* GPIO_109 */
+ "UIM1_CLK", /* GPIO_110 */
+ "UIM1_RESET", /* GPIO_111 */
+ "UIM1_PRESENT", /* GPIO_112 */
+ "UIM_BATT_ALARM", /* GPIO_113 */
+ "GRFC_8", /* GPIO_114 */
+ "GRFC_9", /* GPIO_115 */
+ "TX_GTR_THRES", /* GPIO_116 */
+ "ACCEL_INT", /* GPIO_117 */
+ "GYRO_INT", /* GPIO_118 */
+ "COMPASS_INT", /* GPIO_119 */
+ "PROXIMITY_INT_N", /* GPIO_120 */
+ "FP_IRQ", /* GPIO_121 */
+ "P_SENSE", /* GPIO_122 */
+ "HALL_INTR2", /* GPIO_123 */
+ "HALL_INTR1", /* GPIO_124 */
+ "TS_INT_N", /* GPIO_125 */
+ "NC", /* GPIO_126 */
+ "GRFC_11", /* GPIO_127 */
+ "NC", /* GPIO_128 */
+ "EXT_GPS_LNA_EN", /* GPIO_129 */
+ "NC", /* GPIO_130 */
+ "LCD_ID_DET2", /* GPIO_131 */
+ "LCD_TE2", /* GPIO_132 */
+ "GRFC_14", /* GPIO_133 */
+ "GSM_TX2_PHASE_D", /* GPIO_134 */
+ "NC", /* GPIO_135 */
+ "GRFC_15", /* GPIO_136 */
+ "RFFE3_DATA", /* GPIO_137 */
+ "RFFE3_CLK", /* GPIO_138 */
+ "NC", /* GPIO_139 */
+ "NC", /* GPIO_140 */
+ "RFFE5_DATA", /* GPIO_141 */
+ "RFFE5_CLK", /* GPIO_142 */
+ "NC", /* GPIO_143 */
+ "COEX_UART_TX", /* GPIO_144 */
+ "COEX_UART_RX", /* GPIO_145 */
+ "RFFE2_DATA", /* GPIO_146 */
+ "RFFE2_CLK", /* GPIO_147 */
+ "RFFE1_DATA", /* GPIO_148 */
+ "RFFE1_CLK"; /* GPIO_149 */
+
+ touchscreen_default: touchscreen-default {
+ pins = "gpio89", "gpio125";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ touchscreen_sleep: touchscreen-sleep {
+ pins = "gpio89", "gpio125";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
new file mode 100644
index 0000000000000..7bf6ad1a214bd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+ model = "Xiaomi Mi Note 2";
+ compatible = "xiaomi,scorpio", "qcom,msm8996pro", "qcom,msm8996";
+ chassis-type = "handset";
+ qcom,msm-id = <305 0x10000>;
+ qcom,board-id = <34 0>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@83401000 {
+ compatible = "simple-framebuffer";
+ reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>;
+ width = <1080>;
+ height = <1920>;
+ stride = <(1080 * 3)>;
+ format = "r8g8b8";
+
+ /* DSI0 and MDP SMMU clocks */
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MMSS_MMAGIC_AHB_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc SMMU_MDP_AHB_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>;
+
+ /* MDSS power domain */
+ power-domains = <&mmcc MDSS_GDSC>;
+ };
+ };
+
+ reserved-memory {
+ cont_splash_mem: memory@83401000 {
+ reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>;
+ no-map;
+ };
+ };
+};
+
+&adsp_pil {
+ firmware-name = "qcom/msm8996/scorpio/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+ touchkey: touchkey@28 {
+ compatible = "cypress,sf3155";
+ reg = <0x28>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+ avdd-supply = <&vreg_l6a_1p8>;
+ vdd-supply = <&vdd_3v2_tp>;
+ linux,keycodes = <KEY_BACK KEY_MENU>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&touchkey_default>;
+ pinctrl-1 = <&touchkey_sleep>;
+ };
+
+ touchscreen: atmel-mxt-ts@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+ vdda-supply = <&vreg_l6a_1p8>;
+ vdd-supply = <&vdd_3v2_tp>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-1 = <&touchscreen_sleep>;
+ };
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn";
+ };
+};
+
+&mdp_smmu {
+ /*
+ * Probing this SMMU causes a crash due to writing to some secure
+ * registers. Disable it for now.
+ */
+ status = "disabled";
+};
+
+&mdss {
+ /*
+ * MDSS depends on the MDP SMMU, and probing it alters the bootloader
+ * configured framebuffer used by simplefb. Disable it for now.
+ */
+ status = "disabled";
+};
+
+&mss_pil {
+ firmware-name = "qcom/msm8996/scorpio/mba.mbn",
+ "qcom/msm8996/scorpio/modem.mbn";
+};
+
+&pm8994_lpg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_default>;
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ function-enumerator = <1>;
+ };
+
+ led@6 {
+ reg = <6>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ function-enumerator = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
+&slpi_pil {
+ firmware-name = "qcom/msm8996/scorpio/slpi.mbn";
+};
+
+&sound {
+ compatible = "qcom,apq8096-sndcard";
+ model = "scorpio";
+ audio-routing = "RX_BIAS", "MCLK";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_6_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 AIF4_PB>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 AIF1_CAP>;
+ };
+ };
+};
+
+&venus {
+ firmware-name = "qcom/msm8996/scorpio/venus.mbn";
+};
+
+&rpm_requests {
+ regulators-0 {
+ vreg_l3a_0p875: l3 {
+ regulator-name = "vreg_l3a_0p875";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ vreg_l11a_1p1: l11 {
+ regulator-name = "vreg_l11a_1p1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+ vreg_l17a_2p8: l17 {
+ regulator-name = "vreg_l17a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l18a_2p8: l18 {
+ regulator-name = "vreg_l18a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ vreg_l22a_3p0: l22 {
+ regulator-name = "vreg_l22a_3p0";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <3500000>;
+ };
+ vreg_l29a_2p7: l29 {
+ regulator-name = "vreg_l29a_2p7";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+ };
+};
+
+&vdd_gfx {
+ regulator-max-microvolt = <1065000>;
+};
+
+&pm8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "VOL_UP_N", /* GPIO_2 */
+ "SPKR_ID", /* GPIO_3 */
+ "PWM_HAPTICS", /* GPIO_4 */
+ "INFARED_DRV", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "KEYPAD_LED_EN_A", /* GPIO_7 */
+ "WL_EN", /* GPIO_8 */
+ "3P3_ENABLE", /* GPIO_9 */
+ "KEYPAD_LED_EN_B", /* GPIO_10 */
+ "FP_ID", /* GPIO_11 */
+ "NC", /* GPIO_12 */
+ "NC", /* GPIO_13 */
+ "NC", /* GPIO_14 */
+ "DIVCLK1_CDC", /* GPIO_15 */
+ "DIVCLK2_HAPTICS", /* GPIO_16 */
+ "NC", /* GPIO_17 */
+ "32KHz_CLK_IN", /* GPIO_18 */
+ "BT_EN", /* GPIO_19 */
+ "PMIC_SLB", /* GPIO_20 */
+ "UIM_BATT_ALARM", /* GPIO_21 */
+ "NC"; /* GPIO_22 */
+
+ keypad_default: keypad-default-state {
+ pins = "gpio7", "gpio10";
+ function = PMIC_GPIO_FUNC_FUNC1;
+ output-low;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ power-source = <PM8994_GPIO_S4>;
+ bias-disable;
+ };
+};
+
+&pm8994_mpps {
+ gpio-line-names =
+ "VREF_SDC_UIM_APC", /* MPP_1 */
+ "NC", /* MPP_2 */
+ "VREF_DACX", /* MPP_3 */
+ "NC", /* MPP_4 */
+ "NC", /* MPP_5 */
+ "STAT_SMB1351", /* MPP_6 */
+ "NC", /* MPP_7 */
+ "NC"; /* MPP_8 */
+};
+
+&pmi8994_gpios {
+ gpio-line-names =
+ "NC", /* GPIO_1 */
+ "SPKR_PA_RST", /* GPIO_2 */
+ "NC", /* GPIO_3 */
+ "NC", /* GPIO_4 */
+ "NC", /* GPIO_5 */
+ "NC", /* GPIO_6 */
+ "NC", /* GPIO_7 */
+ "NC", /* GPIO_8 */
+ "NC", /* GPIO_9 */
+ "NC"; /* GPIO_10 */
+};
+
+&tlmm {
+ gpio-line-names =
+ "ESE_SPI_MOSI", /* GPIO_0 */
+ "ESE_SPI_MISO", /* GPIO_1 */
+ "NC", /* GPIO_2 */
+ "ESE_SPI_CLK", /* GPIO_3 */
+ "MSM_UART_TX", /* GPIO_4 */
+ "MSM_UART_RX", /* GPIO_5 */
+ "NFC_I2C_SDA", /* GPIO_6 */
+ "NFC_I2C_SCL", /* GPIO_7 */
+ "OLED_RESET_N", /* GPIO_8 */
+ "NFC_IRQ", /* GPIO_9 */
+ "OLED_TE", /* GPIO_10 */
+ "OLED_ID_DET1", /* GPIO_11 */
+ "NFC_DISABLE", /* GPIO_12 */
+ "CAM_MCLK0", /* GPIO_13 */
+ "OLED_ID_DET2", /* GPIO_14 */
+ "CAM_MCLK2", /* GPIO_15 */
+ "ESE_PWR_REQ", /* GPIO_16 */
+ "CCI_I2C_SDA0", /* GPIO_17 */
+ "CCI_I2C_SCL0", /* GPIO_18 */
+ "CCI_I2C_SDA1", /* GPIO_19 */
+ "CCI_I2C_SCL1", /* GPIO_20 */
+ "NFC_DWL_REQ", /* GPIO_21 */
+ "CCI_TIMER1", /* GPIO_22 */
+ "WEBCAM1_RESET_N", /* GPIO_23 */
+ "ESE_IRQ", /* GPIO_24 */
+ "NC", /* GPIO_25 */
+ "WEBCAM1_STANDBY", /* GPIO_26 */
+ "NC", /* GPIO_27 */
+ "NC", /* GPIO_28 */
+ "OLED_ERR_FG", /* GPIO_29 */
+ "CAM1_RST_N", /* GPIO_30 */
+ "HIFI_SW_MUTE", /* GPIO_31 */
+ "NC", /* GPIO_32 */
+ "NC", /* GPIO_33 */
+ "FP_DOME_SW", /* GPIO_34 */
+ "PCI_E0_RST_N", /* GPIO_35 */
+ "PCI_E0_CLKREQ_N", /* GPIO_36 */
+ "PCI_E0_WAKE", /* GPIO_37 */
+ "OV_PWDN", /* GPIO_38 */
+ "NC", /* GPIO_39 */
+ "VDDR_1P6_EN", /* GPIO_40 */
+ "QCA_UART_TXD", /* GPIO_41 */
+ "QCA_UART_RXD", /* GPIO_42 */
+ "QCA_UART_CTS", /* GPIO_43 */
+ "QCA_UART_RTS", /* GPIO_44 */
+ "MAWC_UART_TX", /* GPIO_45 */
+ "MAWC_UART_RX", /* GPIO_46 */
+ "NC", /* GPIO_47 */
+ "NC", /* GPIO_48 */
+ "AUDIO_SWITCH_EN", /* GPIO_49 */
+ "FP_SPI_RST", /* GPIO_50 */
+ "TYPEC_I2C_SDA", /* GPIO_51 */
+ "TYPEC_I2C_SCL", /* GPIO_52 */
+ "CODEC_INT2_N", /* GPIO_53 */
+ "CODEC_INT1_N", /* GPIO_54 */
+ "APPS_I2C7_SDA", /* GPIO_55 */
+ "APPS_I2C7_SCL", /* GPIO_56 */
+ "FORCE_USB_BOOT", /* GPIO_57 */
+ "SPKR_I2S_BCK", /* GPIO_58 */
+ "SPKR_I2S_WS", /* GPIO_59 */
+ "SPKR_I2S_DOUT", /* GPIO_60 */
+ "SPKR_I2S_DIN", /* GPIO_61 */
+ "ESE_RSTN", /* GPIO_62 */
+ "TYPEC_INT", /* GPIO_63 */
+ "CODEC_RESET_N", /* GPIO_64 */
+ "PCM_CLK", /* GPIO_65 */
+ "PCM_SYNC", /* GPIO_66 */
+ "PCM_DIN", /* GPIO_67 */
+ "PCM_DOUT", /* GPIO_68 */
+ "CDC_44K1_CLK", /* GPIO_69 */
+ "SLIMBUS_CLK", /* GPIO_70 */
+ "SLIMBUS_DATA0", /* GPIO_71 */
+ "SLIMBUS_DATA1", /* GPIO_72 */
+ "LDO_5V_IN_EN", /* GPIO_73 */
+ "NC", /* GPIO_74 */
+ "TSP_RST_N", /* GPIO_75 */
+ "NC", /* GPIO_76 */
+ "TOUCHKEY_INT", /* GPIO_77 */
+ "SPKR_I2S_MCLK", /* GPIO_78 */
+ "SPKR_PA_INT", /* GPIO_79 */
+ "SENSOR_RESET_N", /* GPIO_80 */
+ "FP_SPI_MOSI", /* GPIO_81 */
+ "FP_SPI_MISO", /* GPIO_82 */
+ "FP_SPI_CS_N", /* GPIO_83 */
+ "FP_SPI_CLK", /* GPIO_84 */
+ "HIFI_SD", /* GPIO_85 */
+ "CAM_VDD_1P05_EN", /* GPIO_86 */
+ "MSM_TS_I2C_SDA", /* GPIO_87 */
+ "MSM_TS_I2C_SCL", /* GPIO_88 */
+ "NC", /* GPIO_89 */
+ "ESE_SPI_CS_N", /* GPIO_90 */
+ "NC", /* GPIO_91 */
+ "NC", /* GPIO_92 */
+ "NC", /* GPIO_93 */
+ "NC", /* GPIO_94 */
+ "NC", /* GPIO_95 */
+ "NC", /* GPIO_96 */
+ "GRFC_0", /* GPIO_97 */
+ "GRFC_1", /* GPIO_98 */
+ "NC", /* GPIO_99 */
+ "GRFC_3", /* GPIO_100 */
+ "GRFC_4", /* GPIO_101 */
+ "NC", /* GPIO_102 */
+ "NC", /* GPIO_103 */
+ "GRFC_7", /* GPIO_104 */
+ "UIM2_DATA", /* GPIO_105 */
+ "UIM2_CLK", /* GPIO_106 */
+ "UIM2_RESET", /* GPIO_107 */
+ "UIM2_PRESENT", /* GPIO_108 */
+ "UIM1_DATA", /* GPIO_109 */
+ "UIM1_CLK", /* GPIO_110 */
+ "UIM1_RESET", /* GPIO_111 */
+ "UIM1_PRESENT", /* GPIO_112 */
+ "UIM_BATT_ALARM", /* GPIO_113 */
+ "GRFC_8", /* GPIO_114 */
+ "GRFC_9", /* GPIO_115 */
+ "TX_GTR_THRES", /* GPIO_116 */
+ "ACC_INT", /* GPIO_117 */
+ "GYRO_INT", /* GPIO_118 */
+ "COMPASS_INT", /* GPIO_119 */
+ "PROXIMITY_INT_N", /* GPIO_120 */
+ "FP_IRQ", /* GPIO_121 */
+ "TSP_TA", /* GPIO_122 */
+ "HALL_INTR2", /* GPIO_123 */
+ "HALL_INTR1", /* GPIO_124 */
+ "TS_INT_N", /* GPIO_125 */
+ "NC", /* GPIO_126 */
+ "GRFC_11", /* GPIO_127 */
+ "HIFI_PWR_EN", /* GPIO_128 */
+ "EXT_GPS_LNA_EN", /* GPIO_129 */
+ "NC", /* GPIO_130 */
+ "NC", /* GPIO_131 */
+ "NC", /* GPIO_132 */
+ "GRFC_14", /* GPIO_133 */
+ "GSM_TX2_PHASE_D", /* GPIO_134 */
+ "HIFI_SW_SEL", /* GPIO_135 */
+ "GRFC_15", /* GPIO_136 */
+ "RFFE3_DATA", /* GPIO_137 */
+ "RFFE3_CLK", /* GPIO_138 */
+ "NC", /* GPIO_139 */
+ "NC", /* GPIO_140 */
+ "RFFE5_DATA", /* GPIO_141 */
+ "RFFE5_CLK", /* GPIO_142 */
+ "NC", /* GPIO_143 */
+ "COEX_UART_TX", /* GPIO_144 */
+ "COEX_UART_RX", /* GPIO_145 */
+ "RFFE2_DATA", /* GPIO_146 */
+ "RFFE2_CLK", /* GPIO_147 */
+ "RFFE1_DATA", /* GPIO_148 */
+ "RFFE1_CLK"; /* GPIO_149 */
+
+ touchkey_default: touchkey_default {
+ pins = "gpio77";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ touchkey_sleep: touchkey_sleep {
+ pins = "gpio77";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen_default {
+ pins = "gpio75", "gpio125";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ touchscreen_sleep: touchscreen_sleep {
+ pins = "gpio75", "gpio125";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};