From: Ivan Bornyakov Date: Thu, 2 Dec 2021 05:57:24 +0000 (+0300) Subject: dt-bindings: bus: imx-weim: add words about continuous bclk X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ced795c2648aae44314aa8027e8e1d691ea6153f;p=linux.git dt-bindings: bus: imx-weim: add words about continuous bclk Document continuous Burst Clock option. With this option Burst Clock, if enabled, will output continuous clock, otherwise Burst Clock will output clock only when necessary. Signed-off-by: Ivan Bornyakov Reviewed-by: Rob Herring Signed-off-by: Shawn Guo --- diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 1b1d1c5c21ea1..e7f502070d77e 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -48,6 +48,11 @@ Optional properties: devices, the presence of this property indicates that the weim bus should operate in Burst Clock Mode. + - fsl,continuous-burst-clk Make Burst Clock to output continuous clock. + Without this option Burst Clock will output clock + only when necessary. This takes effect only if + "fsl,burst-clk-enable" is set. + Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the