From: Chen-Yu Tsai Date: Sun, 15 Dec 2019 16:59:13 +0000 (+0100) Subject: media: sun4i-csi: Fix data sampling polarity handling X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=cf9e6d5dbdd56ef2aa72f28c806711c4293c8848;p=linux.git media: sun4i-csi: Fix data sampling polarity handling The CLK_POL field specifies whether data is sampled on the falling or rising edge of PCLK, not whether the data lines are active high or low. Evidence of this can be found in the timing diagram labeled "horizontal size setting and pixel clock timing". Fix the setting by checking the correct flag, V4L2_MBUS_PCLK_SAMPLE_RISING. While at it, reorder the three polarity flag checks so HSYNC and VSYNC are grouped together. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c index d6979e11a67b2..8b567d0f019bf 100644 --- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c +++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c @@ -279,8 +279,8 @@ static int sun4i_csi_start_streaming(struct vb2_queue *vq, unsigned int count) csi->regs + CSI_WIN_CTRL_H_REG); hsync_pol = !!(bus->flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH); - pclk_pol = !!(bus->flags & V4L2_MBUS_DATA_ACTIVE_HIGH); vsync_pol = !!(bus->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH); + pclk_pol = !!(bus->flags & V4L2_MBUS_PCLK_SAMPLE_RISING); writel(CSI_CFG_INPUT_FMT(csi_fmt->input) | CSI_CFG_OUTPUT_FMT(csi_fmt->output) | CSI_CFG_VSYNC_POL(vsync_pol) |