From: Adam Ford Date: Sat, 14 Jan 2023 22:56:45 +0000 (-0600) Subject: arm64: dts: renesas: beacon-renesom: Fix gpio expander reference X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=d7f9492dfc03153ac56ab59066a196558748f575;p=linux.git arm64: dts: renesas: beacon-renesom: Fix gpio expander reference The board used to originally introduce the Beacon Embedded RZ/G2[M/N/H] boards had a GPIO expander with address 20, but this was changed when the final board went to production. The production boards changed both the part itself and the address. With the incorrect address, the LCD cannot come up. If the LCD fails, the rcar-du driver fails to come up, and that also breaks HDMI. Pre-release board were not shipped to the general public, so it should be safe to push this as a fix. Anyone with a production board would have video fail due to this GPIO expander change. Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit") Signed-off-by: Adam Ford Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20230114225647.227972-1-aford173@gmail.com Signed-off-by: Geert Uytterhoeven --- diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index d3ec8c45d5af6..3f8b6d7b21240 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -437,20 +437,6 @@ }; }; - /* 0 - lcd_reset */ - /* 1 - lcd_pwr */ - /* 2 - lcd_select */ - /* 3 - backlight-enable */ - /* 4 - Touch_shdwn */ - /* 5 - LCD_H_pol */ - /* 6 - lcd_V_pol */ - gpio_exp1: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - touchscreen@26 { compatible = "ilitek,ili2117"; reg = <0x26>; @@ -482,6 +468,16 @@ }; }; }; + + gpio_exp1: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select", + "backlight-enable", "Touch_shdwn", + "LCD_H_pol", "lcd_V_pol"; + }; }; &lvds0 {