From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: Tue, 11 May 2021 04:30:38 +0000 (+0200)
Subject: ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=d943728fc7f258fb9a9414274d5eb60fdd15e853;p=linux.git

ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID

Latest kernel is actually using phy-mode property, so set proper value to make
fec interface work again.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index fa2307d8ce861..c713ac03b3b92 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -112,7 +112,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-supply = <&vgen2_1v2_eth>;
 	status = "okay";