From: Alexis Ballier Date: Thu, 6 Feb 2020 15:10:25 +0000 (+0100) Subject: arm64: dts: rockchip: Explicitly pinmux the regulator configuration GPIOs on rk3399... X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=dbb0a828e9ab5198bd0bb249f074d86910e123f6;p=linux.git arm64: dts: rockchip: Explicitly pinmux the regulator configuration GPIOs on rk3399-orangepi Those GPIOs define which register is used by the GPU & CPUB regulators for sleep mode. The register is defined here, so better have the GPIOs explicitly set too. Signed-off-by: Alexis Ballier Cc: devicetree@vger.kernel.org Cc: Heiko Stuebner Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200206151025.3813-2-aballier@gentoo.org Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 1767015e684c7..f9f7246d4d2f3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -432,6 +432,8 @@ compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -449,6 +451,8 @@ compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -561,6 +565,14 @@ }; pmic { + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;