From: Vladimir Oltean Date: Wed, 18 Mar 2020 00:16:02 +0000 (+0200) Subject: arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=dd12fa6978a1c9eb76274dc4e27f91d7c77727b2;p=linux.git arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers LS1028A has a functional connection to the eDMA module. Even if the spi-fsl-dspi.c driver is not using DMA for LS1028A now, define the slots in the DMAMUX for connecting the eDMA channels to the 3 DSPI controllers. Signed-off-by: Vladimir Oltean Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 2a7f70b711498..95b6fe89fec02 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -298,6 +298,8 @@ interrupts = ; clock-names = "dspi"; clocks = <&clockgen 4 1>; + dmas = <&edma0 0 62>, <&edma0 0 60>; + dma-names = "tx", "rx"; spi-num-chipselects = <4>; little-endian; status = "disabled"; @@ -311,6 +313,8 @@ interrupts = ; clock-names = "dspi"; clocks = <&clockgen 4 1>; + dmas = <&edma0 0 58>, <&edma0 0 56>; + dma-names = "tx", "rx"; spi-num-chipselects = <4>; little-endian; status = "disabled"; @@ -324,6 +328,8 @@ interrupts = ; clock-names = "dspi"; clocks = <&clockgen 4 1>; + dmas = <&edma0 0 54>, <&edma0 0 2>; + dma-names = "tx", "rx"; spi-num-chipselects = <3>; little-endian; status = "disabled";