From: Mario Limonciello Date: Fri, 28 May 2021 16:02:34 +0000 (-0500) Subject: nvme-pci: look for StorageD3Enable on companion ACPI device instead X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=e21e0243e7b0f1c2a21d21f4d115f7b37175772a;p=linux.git nvme-pci: look for StorageD3Enable on companion ACPI device instead The documentation around the StorageD3Enable property hints that it should be made on the PCI device. This is where newer AMD systems set the property and it's required for S0i3 support. So rather than look for nodes of the root port only present on Intel systems, switch to the companion ACPI device for all systems. David Box from Intel indicated this should work on Intel as well. Link: https://lore.kernel.org/linux-nvme/YK6gmAWqaRmvpJXb@google.com/T/#m900552229fa455867ee29c33b854845fce80ba70 Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Fixes: df4f9bc4fb9c ("nvme-pci: add support for ACPI StorageD3Enable property") Suggested-by: Liang Prike Acked-by: Raul E Rangel Signed-off-by: Mario Limonciello Reviewed-by: David E. Box Signed-off-by: Christoph Hellwig --- diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index a29b170701fc6..3aa7245a505fd 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2831,10 +2831,7 @@ static unsigned long check_vendor_combination_bug(struct pci_dev *pdev) #ifdef CONFIG_ACPI static bool nvme_acpi_storage_d3(struct pci_dev *dev) { - struct acpi_device *adev; - struct pci_dev *root; - acpi_handle handle; - acpi_status status; + struct acpi_device *adev = ACPI_COMPANION(&dev->dev); u8 val; /* @@ -2842,28 +2839,9 @@ static bool nvme_acpi_storage_d3(struct pci_dev *dev) * must use D3 to support deep platform power savings during * suspend-to-idle. */ - root = pcie_find_root_port(dev); - if (!root) - return false; - adev = ACPI_COMPANION(&root->dev); if (!adev) return false; - - /* - * The property is defined in the PXSX device for South complex ports - * and in the PEGP device for North complex ports. - */ - status = acpi_get_handle(adev->handle, "PXSX", &handle); - if (ACPI_FAILURE(status)) { - status = acpi_get_handle(adev->handle, "PEGP", &handle); - if (ACPI_FAILURE(status)) - return false; - } - - if (acpi_bus_get_device(handle, &adev)) - return false; - if (fwnode_property_read_u8(acpi_fwnode_handle(adev), "StorageD3Enable", &val)) return false;