From: Luca Weiss <luca@z3ntu.xyz>
Date: Tue, 9 May 2023 21:16:35 +0000 (+0200)
Subject: ARM: dts: qcom: msm8226: Use XO from rpmcc where possible
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=e280427384269fba93c7ec0373afe87bc39d7945;p=linux.git

ARM: dts: qcom: msm8226: Use XO from rpmcc where possible

The xo clock being used everywhere actually goes via the RPM. Since the
rpmcc driver recently got support for this clock we can use this now.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-msm8226-mmcc-parents-v1-1-83a2dfc986ab@z3ntu.xyz
---

diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index a3a9162e9c28e..dd67c881c378a 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -182,7 +182,7 @@
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdhc1_default_state>;
@@ -198,7 +198,7 @@
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdhc2_default_state>;
@@ -214,7 +214,7 @@
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
 				 <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdhc3_default_state>;
@@ -368,7 +368,8 @@
 					compatible = "qcom,usb-hs-phy-msm8226",
 						     "qcom,usb-hs-phy";
 					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
 					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
 					reset-names = "phy", "por";
@@ -628,7 +629,7 @@
 			power-domains = <&rpmpd MSM8226_VDDCX>;
 			power-domain-names = "cx";
 
-			clocks = <&xo_board>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "xo";
 
 			memory-region = <&adsp_region>;