From: Catalin Marinas Date: Thu, 4 Oct 2012 13:22:23 +0000 (+0100) Subject: arm64: vexpress: Add CLCD support to the ARMv8 model platform X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=e2b6b35ee77522c2e15e770aded0b05c25ca0616;p=linux.git arm64: vexpress: Add CLCD support to the ARMv8 model platform This patch enables CLCD support for the VE platform emulated by the ARMv8 software model (DT bindings are based on Pawel's vexpress patches) together with defconfig entries for SERIO_AMBAKMI and FB_ARMCLCD. Signed-off-by: Catalin Marinas Acked-by: Pawel Moll --- diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi index ac2cb2418025a..c46cbb29f3c6b 100644 --- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi @@ -22,7 +22,7 @@ bank-width = <4>; }; - vram@2,00000000 { + v2m_video_ram: vram@2,00000000 { compatible = "arm,vexpress-vram"; reg = <2 0x00000000 0x00800000>; }; @@ -179,9 +179,42 @@ clcd@1f0000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; interrupts = <14>; clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; clock-names = "clcdclk", "apb_pclk"; + arm,pl11x,framebuffer = <0x18000000 0x00180000>; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; }; virtio_block@0130000 { diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 9cd37de9aa8d9..4ce602c2c6de8 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -78,6 +78,7 @@ CONFIG_NET_XGENE=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -90,6 +91,7 @@ CONFIG_VIRTIO_CONSOLE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y +CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set