From: Troy Lee Date: Mon, 7 Dec 2020 09:00:11 +0000 (+0800) Subject: dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=e36a17f846bc9ebc540a6c53f38421a1b2dadfdb;p=linux.git dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support Add Aspeed AST2400 and AST2600 binding for the Aspeed EDAC driver. Signed-off-by: Troy Lee Signed-off-by: Borislav Petkov Acked-by: Joel Stanley Link: https://lkml.kernel.org/r/20201207090013.14145-1-troy_lee@aspeedtech.com --- diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt index 6a0f3d90d6822..8ca9e0a049d89 100644 --- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt +++ b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt @@ -1,6 +1,6 @@ -Aspeed AST2500 SoC EDAC node +Aspeed BMC SoC EDAC node -The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error +The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error correction check). The memory controller supports SECDED (single bit error correction, double bit @@ -11,7 +11,10 @@ Note, the bootloader must configure ECC mode in the memory controller. Required properties: -- compatible: should be "aspeed,ast2500-sdram-edac" +- compatible: should be one of + - "aspeed,ast2400-sdram-edac" + - "aspeed,ast2500-sdram-edac" + - "aspeed,ast2600-sdram-edac" - reg: sdram controller register set should be <0x1e6e0000 0x174> - interrupts: should be AVIC interrupt #0