From: Vladimir Oltean Date: Wed, 20 Oct 2021 17:33:40 +0000 (+0300) Subject: net: enetc: make sure all traffic classes can send large frames X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=e378f4967c8edd64c680f2e279cb646ee06b6f2d;p=linux.git net: enetc: make sure all traffic classes can send large frames The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn Signed-off-by: Vladimir Oltean Reviewed-by: Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 4c977dfc44f0d..d522bd5c90b49 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -517,10 +517,13 @@ static void enetc_port_si_configure(struct enetc_si *si) static void enetc_configure_port_mac(struct enetc_hw *hw) { + int tc; + enetc_port_wr(hw, ENETC_PM0_MAXFRM, ENETC_SET_MAXFRM(ENETC_RX_MAXFRM_SIZE)); - enetc_port_wr(hw, ENETC_PTCMSDUR(0), ENETC_MAC_MAXFRM_SIZE); + for (tc = 0; tc < 8; tc++) + enetc_port_wr(hw, ENETC_PTCMSDUR(tc), ENETC_MAC_MAXFRM_SIZE); enetc_port_wr(hw, ENETC_PM0_CMD_CFG, ENETC_PM0_CMD_PHY_TX_EN | ENETC_PM0_CMD_TXP | ENETC_PM0_PROMISC);