From: Amit Cohen <amcohen@nvidia.com>
Date: Wed, 15 Nov 2023 12:17:18 +0000 (+0100)
Subject: mlxsw: Extend MRSR pack() function to support new commands
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=e6dbab40fa096ed5e882e25cab54c3bdad57762c;p=linux.git

mlxsw: Extend MRSR pack() function to support new commands

Currently mlxsw_reg_mrsr_pack() always sets 'command=1'. As preparation for
support of new reset flow, pass the command as an argument to the
function and add an enum for this field.

For now, always pass 'command=1' to the pack() function.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index e4b25e187467a..7af37f78ed1a4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1491,7 +1491,7 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci,
 		return err;
 	}
 
-	mlxsw_reg_mrsr_pack(mrsr_pl);
+	mlxsw_reg_mrsr_pack(mrsr_pl, MLXSW_REG_MRSR_COMMAND_SOFTWARE_RESET);
 	err = mlxsw_reg_write(mlxsw_pci->core, MLXSW_REG(mrsr), mrsr_pl);
 	if (err)
 		return err;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 25b294fdeb3df..13c0ff9945378 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -10122,6 +10122,15 @@ mlxsw_reg_mgir_unpack(char *payload, u32 *hw_rev, char *fw_info_psid,
 
 MLXSW_REG_DEFINE(mrsr, MLXSW_REG_MRSR_ID, MLXSW_REG_MRSR_LEN);
 
+enum mlxsw_reg_mrsr_command {
+	/* Switch soft reset, does not reset PCI firmware. */
+	MLXSW_REG_MRSR_COMMAND_SOFTWARE_RESET = 1,
+	/* Reset will be done when PCI link will be disabled.
+	 * This command will reset PCI firmware also.
+	 */
+	MLXSW_REG_MRSR_COMMAND_RESET_AT_PCI_DISABLE = 6,
+};
+
 /* reg_mrsr_command
  * Reset/shutdown command
  * 0 - do nothing
@@ -10130,10 +10139,11 @@ MLXSW_REG_DEFINE(mrsr, MLXSW_REG_MRSR_ID, MLXSW_REG_MRSR_LEN);
  */
 MLXSW_ITEM32(reg, mrsr, command, 0x00, 0, 4);
 
-static inline void mlxsw_reg_mrsr_pack(char *payload)
+static inline void mlxsw_reg_mrsr_pack(char *payload,
+				       enum mlxsw_reg_mrsr_command command)
 {
 	MLXSW_REG_ZERO(mrsr, payload);
-	mlxsw_reg_mrsr_command_set(payload, 1);
+	mlxsw_reg_mrsr_command_set(payload, command);
 }
 
 /* MLCR - Management LED Control Register