From: Anatoliy Klymenko Date: Wed, 24 Jan 2024 02:53:58 +0000 (-0800) Subject: drm: xlnx: zynqmp_dpsub: Make drm bridge discoverable X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=e8ef91f14db1d4259c570a543b0927d7c72fcc31;p=linux.git drm: xlnx: zynqmp_dpsub: Make drm bridge discoverable ZynqMP DPSUB supports 2 input modes: DMA based and live video. In the first mode, the driver implements CRTC and DP encoder DRM bridge to model the complete display pipeline. In this case, DRM bridge is being directly instantiated within the driver, not using any bridge discovery mechanisms. In the live video input mode video signal is generated by FPGA fabric and passed into DPSUB over the connected bus. In this mode driver exposes the DP encoder as a DRM bridge, expecting external CRTC to discover it via drm_of_find_panel_or_bridge() or a similar call. This discovery relies on drm_bridge.of_node being properly set. Assign device OF node to the bridge prior to registering it. This will make said bridge discoverable by an external CRTC driver. Signed-off-by: Anatoliy Klymenko Reviewed-by: Tomi Valkeinen Reviewed-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20240124025402.373620-2-anatoliy.klymenko@amd.com --- diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c index a0606fab0e22c..d60b7431603ff 100644 --- a/drivers/gpu/drm/xlnx/zynqmp_dp.c +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c @@ -1721,6 +1721,7 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub) bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD; bridge->type = DRM_MODE_CONNECTOR_DisplayPort; + bridge->of_node = dp->dev->of_node; dpsub->bridge = bridge; /*