From: Uwe Kleine-König Date: Wed, 17 Apr 2024 09:03:28 +0000 (+0200) Subject: serial: stm32: Reset .throttled state in .startup() X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ea2624b5b829b8f93c0dce25721d835969b34faf;p=linux.git serial: stm32: Reset .throttled state in .startup() When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index d60cbac691944..4fa5a03ebac08 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -1092,6 +1092,7 @@ static int stm32_usart_startup(struct uart_port *port) val |= USART_CR2_SWAP; writel_relaxed(val, port->membase + ofs->cr2); } + stm32_port->throttled = false; /* RX FIFO Flush */ if (ofs->rqr != UNDEF_REG)