From: Randy Dunlap Date: Thu, 11 Jan 2024 04:33:01 +0000 (-0800) Subject: media: i2c: ar0521: fix spellos X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=eba5e4075505b758fb36967e83ba43d4b994a2e0;p=linux.git media: i2c: ar0521: fix spellos Fix spelling mistakes as reported by codespell. Signed-off-by: Randy Dunlap Cc: Krzysztof Hałasa Cc: Shawn Guo Cc: Sascha Hauer Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil --- diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c index c7d5fa532ae1c..09331cf95c62d 100644 --- a/drivers/media/i2c/ar0521.c +++ b/drivers/media/i2c/ar0521.c @@ -314,7 +314,7 @@ static void ar0521_calc_pll(struct ar0521_dev *sensor) * In the clock tree: * MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2 * - * Generic pixel_rate to bus clock frequencey equation: + * Generic pixel_rate to bus clock frequency equation: * MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2 * * From which we derive the PIXEL_CLOCK to use in the clock tree: @@ -327,7 +327,7 @@ static void ar0521_calc_pll(struct ar0521_dev *sensor) * * TODO: in case we have less data lanes we have to reduce the desired * VCO not to exceed the limits specified by the datasheet and - * consequentially reduce the obtained pixel clock. + * consequently reduce the obtained pixel clock. */ pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count; bpp = ar0521_code_to_bpp(sensor); @@ -806,7 +806,7 @@ static const struct initial_reg { REGS(be(0x3F00), be(0x0017), /* 3F00: BM_T0 */ be(0x02DD), /* 3F02: BM_T1 */ - /* 3F04: if Ana_gain less than 2, use noise_floor0, multipl */ + /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */ be(0x0020), /* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */ be(0x0040),