From: Antoine Tenart Date: Mon, 24 Sep 2018 09:00:01 +0000 (+0200) Subject: arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=eeee84f7a6400807e22240e3bd43aac4a01c0471;p=linux.git arm64: dts: marvell: armada-cp110: change the PPv2 IRQ names This patch changes the PPv2 IRQ names in the CP110 device tree to match a corresponding change in the Marvell PPv2 driver. The reason this was updated is the IRQ where names after Tx/Rx interrupts, but this is not true and can be configured. A following patch will add more of them and the names wouldn't make sense. Signed-off-by: Antoine Tenart Signed-off-by: Gregory CLEMENT --- diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index df3f85c3ff359..9d2a634b0975f 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -71,8 +71,8 @@ , , ; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "link"; port-id = <0>; gop-port-id = <0>; status = "disabled"; @@ -85,8 +85,8 @@ , , ; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "link"; port-id = <1>; gop-port-id = <2>; status = "disabled"; @@ -99,8 +99,8 @@ , , ; - interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2", - "tx-cpu3", "rx-shared", "link"; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "link"; port-id = <2>; gop-port-id = <3>; status = "disabled";