From: Danilo Krummrich Date: Sun, 29 May 2022 13:26:38 +0000 (+0200) Subject: dt-bindings: ps2-gpio: document bus signals open drain X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=ef17936654043829ac527a2e0483d944eaba30aa;p=linux.git dt-bindings: ps2-gpio: document bus signals open drain The PS/2 bus defines data and clock line to be open drain, this should be reflected in the gpio flags set in the binding. Especially, this is important since the clock line sometimes is driven by the host while being used as interrupt source. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Danilo Krummrich Reviewed-by: Linus Walleij Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220529132638.13420-2-danilokrummrich@dk-develop.de --- diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.yaml b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml index 304132fd30c51..a63d9172346f1 100644 --- a/Documentation/devicetree/bindings/serio/ps2-gpio.yaml +++ b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml @@ -15,12 +15,18 @@ properties: data-gpios: description: - the gpio used for the data signal + the gpio used for the data signal - this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN) + from since the signal is open drain by + definition maxItems: 1 clk-gpios: description: - the gpio used for the clock signal + the gpio used for the clock signal - this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN) + from since the signal is open drain by + definition maxItems: 1 interrupts: @@ -52,7 +58,7 @@ examples: compatible = "ps2-gpio"; interrupt-parent = <&gpio>; interrupts = <23 IRQ_TYPE_EDGE_FALLING>; - data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; - clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + clk-gpios = <&gpio 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; write-enable; };