From: Marek Vasut Date: Wed, 22 Apr 2020 10:45:55 +0000 (+0200) Subject: ARM: dts: stm32: Repair PMIC interrupt on AV96 X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=f3aa3bc3a5841e9da07e0235c3ac386c2deba002;p=linux.git ARM: dts: stm32: Repair PMIC interrupt on AV96 The PMIC interrupt line is connected to PA0 on the DHCOR SoM, fix it. This makes the POWER button on the AV96 working, and also all the other PMIC interrupts. Furthermore, scrub the bogus interrupt-parent props. Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Manivannan Sadhasivam Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue --- diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 380ce148520f4..010b7cdf8926b 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -141,7 +141,7 @@ pmic: stpmic@33 { compatible = "st,stpmic1"; reg = <0x33>; - interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; status = "okay"; @@ -198,7 +198,6 @@ regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; interrupts = ; - interrupt-parent = <&pmic>; }; v2v8: ldo2 { @@ -206,7 +205,6 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; interrupts = ; - interrupt-parent = <&pmic>; }; vtt_ddr: ldo3 { @@ -220,7 +218,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; interrupts = ; - interrupt-parent = <&pmic>; }; vdd_sd: ldo5 { @@ -228,7 +225,6 @@ regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; interrupts = ; - interrupt-parent = <&pmic>; regulator-boot-on; }; @@ -237,7 +233,6 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; interrupts = ; - interrupt-parent = <&pmic>; regulator-enable-ramp-delay = <300000>; }; @@ -249,20 +244,17 @@ bst_out: boost { regulator-name = "bst_out"; interrupts = ; - interrupt-parent = <&pmic>; }; vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = ; - interrupt-parent = <&pmic>; regulator-active-discharge = <1>; }; vbus_sw: pwr_sw2 { regulator-name = "vbus_sw"; interrupts = ; - interrupt-parent = <&pmic>; regulator-active-discharge = <1>; }; };