From: Jongsung Kim Date: Fri, 6 Dec 2019 11:40:00 +0000 (+0900) Subject: net: stmmac: reset Tx desc base address before restarting Tx X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=f421031e3ff0dd288a6e1bbde9aa41a25bb814e6;p=linux.git net: stmmac: reset Tx desc base address before restarting Tx Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 644cb5d1fd4f4..bbc65bd332a8b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2009,6 +2009,8 @@ static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan) tx_q->cur_tx = 0; tx_q->mss = 0; netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, chan)); + stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg, + tx_q->dma_tx_phy, chan); stmmac_start_tx_dma(priv, chan); priv->dev->stats.tx_errors++;